Introduction:
Authorized by Toyota, this 1/10 Land Cruiser 80 from FMS Model adopts the FCX10 simulation crawler chassis, which faithfully restores the off-road performance of the original car.
In terms of appearance, FMS maintains a consistently high standard. To ensure durability, the car body is made of PC material. The model is equipped with mirrors and waders. Through the transparent windows, you can see a high degree of simulation, including the detailed dashboard and cockpit interior. The roof features a luggage rack and four off-road lights, and a climbing ladder is installed at the rear.
The vehicle comes pre-installed with headlights, front, side, and rear turn signals, reverse lights, and other lighting components. The car shell uses a magnetic interface to draw power from the chassis, allowing the lights of the entire vehicle to be activated with a single button on the remote control. Additionally, pre-installed fenders help prevent mud from spilling onto the body and chassis.
FMS has also co-branded with OVRmag.com to launch a fully licensed edition. This edition adds KC vintage and modern-style lampshades, and comes equipped with HDR wheels and TOYO Open Country A/T III tires.
The chassis adopts a mainstream mid-front power layout with a four-link suspension. To better replicate the real car, straight axles have been fitted, but the larger tires still provide sufficient ground clearance and climbing ability. The mid-front motor and transmission, as an integral unit, lower the vehicle’s center of gravity compared to similar products, reducing the rolling center and the likelihood of rollovers. Meanwhile, a metal-gear waterproof servo is placed on the side of the battery compartment to handle high and low-speed switching.
To maximize performance, FMS uses a high-class brushless power system. Compared to brushed combos, the 50A independent ESC (6V/3A BEC output) and 3541 outer-rotor brushless motor provide precise linear control, allowing the vehicle to crawl at a snail-like uniform speed. The outer-rotor structure also has excellent dynamic balancing characteristics, which reduces the end effect of the stator coils and improves running performance.
For daily maintenance convenience, FMS has also made thoughtful design choices. The battery compartment can be flipped back or quickly released. All electronic components are concentrated in the middle of the chassis, making it easy to maintain, remove, or replace them. Thanks to FMS’s R&D capabilities, a patented knob-type quick-release structure has been innovatively designed. At the same time, the power and signal cables of the lights are perfectly integrated with the magnetic module.
Except for an adventurous spirit, you don’t need to prepare anything else—FMS takes care of the off-road journey for you!
What's in the box:
1 x FMS 1:10 FCX10 OVR LC80 RS Brushless
1 x Transmitter
1 x Receiver (Pre-installed)
1 x Motor (Pre-installed)
1 x Product Manual
Needed to Complete:
4 x AA Batteries for Transmitter
RS Version Requires Battery & Charger Kit (Recommended 2S 7.4V 4400mAH 30C Lipo Battery with XT60 Connector - SKU: C1542)
Specification:
| Product Size |
572 × 251 × 275 mm |
| Transmitter |
MG11 |
| Receiver |
R11D-BS |
| Brushless Motor |
3541-KV1200 |
| ESC |
SL50A 2-3S brushless |
| Steering Servo |
25KG Metal Gear 25.5Kg.cm x1 (waterproof) |
| Wheelbase |
321 mm |
| Tread |
203 mm |
| Approach Angle |
45° |
| Departure Angle |
38° |
| Ground Clearance |
68 mm |
| Steering Type |
Front 2WS |
| Maximum Steering Angle |
49° |
| Maximum Climbing Angle |
60° (artificial turf) |
| Tire Size |
116 × 45 mm |
| Wheelhub Size |
54 × 27.4 mm |
| Wheelhub Adaptor Size |
12 mm |
| Bearing |
Full Bearing |
| Drive System |
4WD |
| Waterproof Class |
Splash-proof |
| Maximum Speed |
20 km/h |
| Maximum Control Distance |
150m in clear space |
