Specification

Background

The J-10 fighter jet, nicknamed "Vigorous Dragon”, is a domestically developed high-performance, multi-role, all-weather third-generation fighter aircraft. It boasts high reliability, survivability, and maneuverability, with a large combat radius, short takeoff and landing distances, strong attack capabilities, and overall combat effectiveness reaching advanced international levels among similar fighter jets.

Introduction

The J-10 EDF Jet features a unique delta wing and canard design for exceptional high-speed handling and also agile low-speed maneuverability. Using common 4S batteries, it is powered by a 64mm ducted fan with a brushless motor and a 40A ESC which helps to replicate the sound of a fighter jet. High-fidelity details include detachable weapon sets, an air refueling probe, navigation lights, and CNC-machined landing gear. Made from EPO 40 foam, it offers impact resistance and a water-resistant paint finish. The J-10 EDF jet is easy to assemble. Experienced modelers can complete assembly in about thirty minutes. Optional paint schemes are also available.

Features

1.The unique layout of a delta wing with canards provides the aircraft with excellent climb rates and climbing altitudes, allowing for easy execution of low-speed high-angle maneuvers. Additionally, the delta wing, canards, and vertical tail are all reinforced with embedded strengthening ribs, effectively increasing the structural integrity of the aircraft and facilitating high-speed flight.
2.Equipped with a 64mm 11-blade ducted fan with a 2840 KV3150 brushless motor and a high-performance 40A ESC, it is paired with commonly available 4S 2200mAh-2600mAh 25c batteries, effortlessly reproducing the thrilling sound of a fighter jet.
3.High-fidelity details include but are not limited to non-functional scale detachable weapon sets (for air force gray livery only), air refueling probe, cockpit interior, pilot figure, and five high-intensity navigation lights.
4.CNC-machined metal front landing gear with built-in CNC metal shock absorption, externally using realistic plastic parts.
5.EPO 40 foam material with high-impact absorption and rigidity.
6.Simulation water-based paint finish, with a full and tough paint film that is water-resistant, heat-resistant, and has a pleasing gloss finish.
7.Features a simple-assembly structure, experienced players can complete all assembly and pre-flight testing in just thirty minutes.
8.Optional paint schemes include the “August 1st” Aerobatic Team paint and the Air Force gray paint.

In The Box

(1) 64mm J-10 EDF PNP
(2) 40A ESC with Reverse Thrust Function (installed)
(3) 2840 KV3150 brushless motor (installed)
(4) 64mm 11-blade ducted fan (installed)
(5) 4x 9g Digital Servo (installed)
(6) Product Manual

Needed to Complete

(1) 6 Channel Transmitter and Receiver
(2) 14.8V 2200-2600mAh 25c Li-Po battery with XT60 connector
(3) LiPo Battery Charger

Notes to Buyers

① RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
② PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
③ EPO foam and cockpits can bubble or deform in high heat. To prevent this, avoid leaving them in direct sunlight when not in use.
④ The vertical tail and canard need to be secured with EPO glue.
⑤ A T6 Torx screwdriver is needed to install the front landing gear.

Specification

The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. It was developed from the Piper PA-11. In close to 40 years of production, over 9,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing.
The FMS 1700mm PA-18 was launched in 2019, and its stable, easy-to-fly and easy-to-operate features have brought full surprises to both new and old pilots. While this trainer has been widely praised, FMS has been constantly asked whether it is possible to reduce the size of the aircraft, including the aircraft itself and the packaging, while maintaining its stability and operating controllability as much as possible, so that it can be picked up like a boarding suitcase.
With the 1300mm PA-18, FMS has answered the above question. The 1300mm PA-18 also adopts a two-section main wing and horizontal stability structure, but at the same time, the fuselage is also two-section, which greatly facilitates players' transportation and carrying. It can be hidden in the corner of a car trunk, ready to be used at any time.
Thanks to its functional flaps, high-lift airfoil, rugged landing gear and oversized pneumatic rubber tires- the 1300mm PA-18 Super Cub has impressive short take-off and landing (STOL) performance, allowing it to operate from just about any terrain.
In addition, the assembly steps of the 1300mm PA-18 are still simple and convenient, and the assembly and disassembly of the entire aircraft can be completed with just a few screws.
For pilots wanting to get the genuine bush-plane experience, the PA-18 Super Cub can be equipped with floats.
The latest 1300mm PA-18 could be a great start to enjoying versatile, fun and exceptionally relaxing flight.

Features:

1. Powerful 3536-850KV motor with 40A ESC provides adequate thrust for any situation.
2. CNC metal landing gear structure for less-than-perfect landings.
3. Oversized pneumatic rubber tires for all-terrain operations.
4. STOL capable (Takes off in less than 3m/10ft)
5. Preinstalled navigation lights
6. Two-section fuselage
7. Two-piece wing and horizontal stabilizer for easy transportation
8. High-strength carbon fiber wing spars
9. Screw-together assembly
10. Large battery bay
11. Preinstalled ball-linked pushrods for increased precision
12. Tough two-blade nylon propellers
13. Functional flaps
14. Optional floats

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

The Perfect RC Airplane For Beginners

The float-equipped airplane is now available for Pre-Order. While floats are out of stock and will ship starting December 9th, the airplane will be shipped immediately upon your order.

For pre-orders placed before October 29th, we have floats limited stock arriving on November 1st and 25th. We will prioritize shipping for these orders, strictly following the order in which they were placed chronologically.

As the newest member of the FMS multi-purpose aircraft lineup, the 1220mm Ranger V2 retains all of the fantastic features that pilots have come to expect from FMS stable flight characteristics, ease of assembly, and realistic general-aviation inspired design.

Built with ultralight EPO foam, the large high-winged airframe configuration gives the Ranger stable flight characteristics and low wing-loading with extraordinary amounts of lift, even at slow speeds. Robust plastic struts give extra strength to the wings during aerobatic maneuvers and the patented high-strength “crash-proof” spring cushioned nose landing gear makes ground handling a breeze.

A great aircraft is nothing without a great, dependable power system. FMS has equipped the ranger with a 3136/1200KV outrunner motor with 20A Predator ESC, which allows the ranger to climb almost vertically on demand!

Featuring red, yellow, or green color schemes, the ranger can always be easily orientated even in overcast weather. Designed specifically for beginner pilots, the ranger boasts effortless assembly. Requiring only several screws and twist-locks to complete assembly, the longest wait time is the time it takes to charge the battery! Additionally, the two-piece design of the fuselage and main wing reduces packaging size by thirty percent, facilitating easy transport and storage!

Reflex V3, an onboard flight stabilization system, is factory installed. The Reflex system features Stabilized, Optimized and Manual flight modes. Reflex V3 is a trusty co-pilot that is perfect for pilots of any skill level.

Don’t miss out on one of the most revolutionary FMS aircraft, the amphibious ranger V2!

Features:

• NEW! Red, Green, or Yellow paint schemes available
• NEW! Two-piece fuselage and main wing structure reducing packaging size by thirty percent, facilitating easy transport and storage
• NEW! Reflex V3 flight control system included and installed
• NEW! Floats available (Optional)
• High-spec power system: 3136/1200KV motor, Predator 20A ESC, 11.1V 1300mAh 25C battery (Included in RTF Version)
• Less than 3m short takeoff and landing capabilities
• High strength, lightweight metal landing gear for all-terrain operations
• Patented high-strength “crash-proof” spring cushioned nose landing gear
• Screw and twist-lock assembly, completed in 3-10 minutes
• 10-15 minute flight time (RTF Version)
• One piece horizontal stabilizer for precise flight characteristics
• Reflex V3 Flight Controller

Notes to Buyers:

① RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
② PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
③ Due to a printing error, the packaging may indicate '1220mm Ranger V3 With Reflex V2.' The correct model is '1220mm Ranger V2 With Reflex V3.' 
④ A T6 Torx screwdriver is needed to install the vertical stabilizer's connecting rod. 
(Customers who have purchased Ranger V2 can log in to their account and redeem a FREE T6 Torx screwdriver with 100 points!)
⑤ For the float-equipped Ranger V2, the plane and floats will be sent as two separate packages.

The 70mm Viper was not always the first choice for players transitioning from prop-driving airplane to jet – the original wire landing gear was not so friendly to pilots unfamiliar with jet takeoffs and landings – but now, she is! FMS 15th Anniversary Edition 70mm Viper, here we go!

There are a lot of FMS jet machines, but the 70mm Viper always soars above the crowd. The comment from players that the Viper “does any acrobatic trick you can throw at it" is a true portrayal of the excellent performance of this aircraft. The 15th anniversary edition of the Viper has been improved based on the previous work – switching out wire landing gear for a full set of CNC metal shock absorbing landing gear (A.K.A kneeling nose) – achieving simplicity, stability and ease of handling during the entire process of takeoff, flight and landing. Digital metal-toothed steering gear and ball-head joint rods provide precise control. The clip-on cockpit design facilitates battery access, and also effectively ensures that the cockpit will not fall off during violent flight. Lightweight EPO materials increase the durability and precision of the aircraft. The optimized airframe curves, long wings and wingtips reduce wind resistance and make the flight attitude of the entire aircraft clearer. 70mm 12-blade EDF unit, high speed brushless 3060 in-runner motor, 80A ESC, in combination with the recommended 6S 3300mAh lithium polymer battery, provide excellent vertical performance, speed range and instantaneous throttle response in flight. Perhaps even more fascinating is the sound the powertrain makes --it's almost like a real turbine.

Key Features

• FMS 15th Anniversary Edition
• High-quality 80A ESC, powerful KV1900 in-runner motor with the latest 70mm 12-blade EDF
• A full set of CNC metal shock-absorbing landing gear (A.K.A kneeling nose)
• With flaps (servo-installed)
• Screw-together construction
• Clip-on cockpit design
• Pre-installed ball-head joints provide precise surface control

Specification

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Skill, know-how and space has always been limiting factors in bringing new enthusiasts into the wonderful world of R/C aviation, until now!
FMS has always been dedicated to enabling pilots of every skill level to enjoy the thrills of flight. Innovation then, is in our DNA.
FMS is proud to announce the 850mm Ranger. Like its sibling, the high winged airframe design with a tricycle landing gear, is very easy to fly by default. A dedicated flight control paired with a GPS sytem allows pilots to fly under beginner, intermediate and fully manual flight modes. An innovative flight perimeter fence and return to home functions provide bulletproof reliability and ease of mind- flying has never been so simple.

Flight perimeter fence function: if the aircraft is in excess of 120m away from the pilot, the aircraft will return to home automatically, with the pilot having the option of taking over the controls at any time. Once over the home point, the aircraft will circle at a 25m altitude at roughly 40km/h.
Return to home function: in the off chance that the pilot loses orientation of the aircraft, the return to home function can be triggered and the aircraft will fly back to the home point. Like the flight perimeter function, this function does not take away the pilots' ability to control the aircraft at any time.
Once over the home point, the Ranger 850 circles until further control inputs are given.
Absolute beginners rejoice! The FMS 850mm Ranger has everything that is needed for flight! A 12A esc/receiver combo reduces the need to connect cables and a 2315-3850kv motor, 7.4V 850mAh 25c battery and four 1.9g micro servos give the lightweight 305g aircraft incredible performance. Fly at a small park, basketball court or even your own back yard!
The innovative 850mm Ranger is the perfect way to start earning your wings!

Features:

• Power system: 2315 3850kv motor, 7.4V 850mAh 25C lipo, 4x 1.9g servo, ESC/RX combo
• Return to home function
• Flight perimeter fence function
• 0 experience necessary!

Types Function:

PNP ( with Reflex V2): Have reflex function, without flight perimeter fence & return to home function.

Exclusive Innovative Reflex system allows pilots to fly under beginner, intermediate and fully manual flight modes. On Stabilized Mode, it can control surface travel allows tame flight characteristics for beginner pilots and can turn on an emergency recovery flight mode when lose control. On Optimized Mode, It Minimizes environmental effects on the airframe - pilot retains maximum control while the Reflex system neutralizes attitude changes caused by whin gusts. OFF Mode, Reflex system off - RC pilot can reach unlimited roll movement by themself improving skill.

RTF (with Gyro): 

Have flight perimeter fence & return to home function, without reflex function.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

64mm Rafale - The best performing RC jets in FMS 64mm series

It comes with durable CNC landing gear.  A replicated design which you don't want to miss out.

Designed by the French Dassault company, the Rafale is a highly maneuverable delta-winged fighter with a full-flying canard. With excellent dogfighting, carrier operations and air to surface attack performance the Rafale has been able to gain worldwide success.

While the FMS 80mm Rafale has attracted extensive attention, we’ve also noticed flight fans wiliness to of collect Rafales of different sizes and trim schemes. After two rounds of voting at home and abroad, the 64mm "NATO Tiger Meet" stood out from all other competitors.
After six rounds of testing, the FMS 64mm Rafale "NATO Tiger Meet" has lived up to everyone's expectations and is now officially launched.

Developed to replicate both the looks and performance of the real aircraft, FMS has dedicated its decades long experience into designing the 64mm Rafale. The 64mm Rafale has a high degree of restoration, within the maximum range allowed by the budget. Details such as scaled outlines, delta wing, pilot figure, cockpit interior, panels, removable armaments, auxiliary fuel tanks, refueling probe, targeting sensor, exhaust grilles are all featured on the model.

Like all other FMS aircraft, the 64mm Rafale was designed to reduce build time to a minimum and experienced builders can complete the build process in as little as 5 minutes.
The 64mm 11-bladed EDF with 2840 brushless motor and 40A high performance ESC easily accomplishes fighter jet maneuvers with realistic sound and speed.

Go get a masterpiece and add the FMS Rafale to your hangar!

Features:

1. 2840 KV3150 brushless motor with a high-performance 40A ESC
2. Scaled details such as scaled outline, delta wing, pilot figure, cockpit interior, panels, removable armaments, auxiliary fuel tanks, refueling probe, targeting sensor, exhaust grilles etc
3.CNC metal front landing gear
4. Water based vibrant NATO Tiger Meet trim scheme

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Specification:

The pinnacle of what a foam jet can be - Futura V3

The FMS Futura is a licensed sport jet developed by FMS in conjunction with Tomahawk- Aviation. Designed by a Sino-German team of engineers, the Futura represents the pinnacle of what a foam jet can be.
While retaining V1 features such as the CNC metal trailing-link landing gear for rough field operations, robust airframe with high-strength wing spars, oversized electronics bay, etc, and V2 features such as 13g all-metal digital servos for increased precision and torque, improved durable and reliable plug-type connectors, the FMS 80mm Futura V3 is upgraded with added alternately flashing navigation lights on the left and right wings and taxi lights on the bottom of the fuselage, and a recognizable and attractive red-grey paint scheme.
Powering the Futura V3 is an industry-leading Hobbywing 100A ESC paired with an uprated 3665-KV2000 motor turning an 80mm 12-bladed fan- delivering breathtaking power with absolute confidence.

Features

1. Power system: Hobbywing 100A ESC, 3665-KV2000motor, 80mm 12 bladed fan
2. CNC all-metal landing gear. 10mm diameter worm drive, trailing-link suspension, highly precise and robust.
3. All servos upgraded to 13g digital all-metal units for improved precision and torque
4. Large tires- suitable for rough-field operations
5. Oversized electronics bay for easy maintenance and accepts large capacity batteries
6. Glue-less assembly, the aircraft is built with only 10 screws
7. Environmentally friendly water-based paint
8. Buckle design latch prevents unexpected canopy release in flight
9. Improved plug-type connectors for added durability and reliability
10. Added alternately flashing navigation lights on wings and taxi lights on the bottom of the fuselage for reproduction and fun to the flight
11. Recognizable and attractive red-gray paint scheme

What's in Box

(1) 80mm EDF with 12 bladed fan
(2) 3665-KV2000 Brushless Motor (installed)
(3) Hobbywing 100A ESC ESC (installed)
(4) 13g Digital All-metal Servos (installed)
(5) CNC All-metal Landing Gear (installed)
(6) Flashing Navigation Lights On Wings And Taxi Tights On the Bottom Of the Fuselage (installed)
(7) Attractive Red-gray Decal
(8) Product Manual

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.