Overview
Features
Videos
Parts
Manual
$199.99 $219.99
Add to Cart Buy Now Sold out
NOTIFY WHEN AVAILABLE
Skip to product information Roll over image to zoom in
1 of 23

Top Highlights

  • The unique layout of a delta wing with canards provides the aircraft with excellent climb rates and climbing altitudes, allowing for easy execution of low-speed high-angle maneuvers. Additionally, the delta wing, canards, and vertical tail are all reinforced with embedded strengthening ribs, effectively increasing the structural integrity of the aircraft and facilitating high-speed flight.
  • Equipped with a 64mm 11-blade ducted fan with a 2840 KV3150 brushless motor and a high-performance 40A ESC, it is paired with commonly available 4S 2200mAh-2600mAh 25c batteries, effortlessly reproducing the thrilling sound of a fighter jet.
  • High-fidelity details include but are not limited to non-functional scale detachable weapon sets (for air force gray livery only), air refueling probe, cockpit interior, pilot figure, and five high-intensity navigation lights.
  • CNC-machined metal front landing gear with built-in CNC metal shock absorption, externally using realistic plastic parts.
  • EPO 40 foam material with high-impact absorption and rigidity.
  • Simulation water-based paint finish, with a full and tough paint film that is water-resistant, heat-resistant, and has a pleasing gloss finish.
  • Features a simple-assembly structure, experienced players can complete all assembly and pre-flight testing in just thirty minutes.
  • Optional paint schemes include the “August 1st” Aerobatic Team paint and the Air Force gray paint.
View more

Description

Background

The J-10 fighter jet, nicknamed "Vigorous Dragon”, is a domestically developed high-performance, multi-role, all-weather third-generation fighter aircraft. It boasts high reliability, survivability, and maneuverability, with a large combat radius, short takeoff and landing distances, strong attack capabilities, and overall combat effectiveness reaching advanced international levels among similar fighter jets.

Introduction

The J-10 EDF Jet features a unique delta wing and canard design for exceptional high-speed handling and also agile low-speed maneuverability. Using common 4S batteries, it is powered by a 64mm ducted fan with a brushless motor and a 40A ESC which helps to replicate the sound of a fighter jet. High-fidelity details include detachable weapon sets, an air refueling probe, navigation lights, and CNC-machined landing gear. Made from EPO 40 foam, it offers impact resistance and a water-resistant paint finish. The J-10 EDF jet is easy to assemble. Experienced modelers can complete assembly in about thirty minutes. Optional paint schemes are also available.

In The Box

(1) 64mm J-10 EDF PNP
(2) 40A ESC with Reverse Thrust Function (installed)
(3) 2840 KV3150 brushless motor (installed)
(4) 64mm 11-blade ducted fan (installed)
(5) 4x 9g Digital Servo (installed)
(6) Product Manual

Needed to Complete

(1) 6 Channel Transmitter and Receiver
(2) 14.8V 2200-2600mAh 25c Li-Po battery with XT60 connector
(3) LiPo Battery Charger

Notes to Buyers

① RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
② PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
③ EPO foam and cockpits can bubble or deform in high heat. To prevent this, avoid leaving them in direct sunlight when not in use.
④ The vertical tail and canard need to be secured with EPO glue.
⑤ A T6 Torx screwdriver is needed to install the front landing gear.

Specification

Model Air Force Gray "August 1st" Aerobatic Team
Flying Weight Around  1100g Around  1000g
Wing Load 59.5g/dm²   ( 0.12oz/in²) 54g/dm²   ( 0.11oz/in²)
Wing Area 18.5dm²    (286.5 sq.in)
Wingspan 690mm /27.2 in
Overall Length 1110mm /43.7 in
Motor Size 2840KV3150
ESC 40A
Servo 9gX4pcs
Radio 6CH Channel
CG (center of gravity) 80-90mm
Prop Size 64mm 12blades
Recommended Battery 14.8V2200mAh-2600mAh 25c with XT60 connector
Aileron  Yes
Rudder Yes
Flaps No
Retracts No
Approx. Flying Duration  3 minutes
Minimum Age Recommendation  14+
Experience Level Intermediate level
Assembly Time  10minutes

View more

Features

High-Power EDF

Powered by a 64mm 11-blade ducted fan, a 2840 KV3150 brushless motor, and a high-performance 40A ESC, the 64mm J-10 requires a 4S 2200mAh-2600mAh 25C batteries for a realistic EDF fighter jet experience.

Stable Flight Technology

Reflex V3 stable flight technology aids pilots during takeoff and landing, stabilizes aircraft in normal and emergency situations, and helps reduce crash risks. Connect the Reflex V3 to your mobile phone via Bluetooth with the FMS app for customizable settings for FMS and other model aircraft.

Scale Detail Replication

Meticulously detailed with a non-functional scale detachable weapon sets (for air force gray livery only), an air refueling probe, a cockpit interior, and a pilot figure. These details provide increased realism.

Durable CNC Landing Gear

CNC-machined metal front landing gear that feature built-in shock absorption and realistic plastic parts for an authentic look and enhanced durability.

Reverse Thrust Capability

The ESC on the J-10 enables reverse taxiing and can also slow down The J-10 after landing. The ESC also includes protections against overheating, low voltage, and signal loss which enhances flight safety.

Bright Navigation Lights

Navigation lights have been added to the vertical tail, main wings, and belly air intake to enhance visibility during flight and replicate the design of real aircraft.

Iconic Paint Design

Choose from the iconic "August 1st" Aerobatic Team scheme or the classic Air Force gray scheme to suit your style.

Detachable Nose Cone Design

The J-10 adopts a detachable nose cone design that is easy to install and remove.

Videos

More Videos Please Go To Our Youtube Channel: FMS Model

Video
Video
Video

Parts

View All Parts

Manual & Support

Description

Description

Background

The J-10 fighter jet, nicknamed "Vigorous Dragon”, is a domestically developed high-performance, multi-role, all-weather third-generation fighter aircraft. It boasts high reliability, survivability, and maneuverability, with a large combat radius, short takeoff and landing distances, strong attack capabilities, and overall combat effectiveness reaching advanced international levels among similar fighter jets.

Introduction

The J-10 EDF Jet features a unique delta wing and canard design for exceptional high-speed handling and also agile low-speed maneuverability. Using common 4S batteries, it is powered by a 64mm ducted fan with a brushless motor and a 40A ESC which helps to replicate the sound of a fighter jet. High-fidelity details include detachable weapon sets, an air refueling probe, navigation lights, and CNC-machined landing gear. Made from EPO 40 foam, it offers impact resistance and a water-resistant paint finish. The J-10 EDF jet is easy to assemble. Experienced modelers can complete assembly in about thirty minutes. Optional paint schemes are also available.

In The Box

(1) 64mm J-10 EDF PNP
(2) 40A ESC with Reverse Thrust Function (installed)
(3) 2840 KV3150 brushless motor (installed)
(4) 64mm 11-blade ducted fan (installed)
(5) 4x 9g Digital Servo (installed)
(6) Product Manual

Needed to Complete

(1) 6 Channel Transmitter and Receiver
(2) 14.8V 2200-2600mAh 25c Li-Po battery with XT60 connector
(3) LiPo Battery Charger

Notes to Buyers

① RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
② PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
③ EPO foam and cockpits can bubble or deform in high heat. To prevent this, avoid leaving them in direct sunlight when not in use.
④ The vertical tail and canard need to be secured with EPO glue.
⑤ A T6 Torx screwdriver is needed to install the front landing gear.

Specification

Model Air Force Gray "August 1st" Aerobatic Team
Flying Weight Around  1100g Around  1000g
Wing Load 59.5g/dm²   ( 0.12oz/in²) 54g/dm²   ( 0.11oz/in²)
Wing Area 18.5dm²    (286.5 sq.in)
Wingspan 690mm /27.2 in
Overall Length 1110mm /43.7 in
Motor Size 2840KV3150
ESC 40A
Servo 9gX4pcs
Radio 6CH Channel
CG (center of gravity) 80-90mm
Prop Size 64mm 12blades
Recommended Battery 14.8V2200mAh-2600mAh 25c with XT60 connector
Aileron  Yes
Rudder Yes
Flaps No
Retracts No
Approx. Flying Duration  3 minutes
Minimum Age Recommendation  14+
Experience Level Intermediate level
Assembly Time  10minutes

Features

Features

High-Power EDF

Powered by a 64mm 11-blade ducted fan, a 2840 KV3150 brushless motor, and a high-performance 40A ESC, the 64mm J-10 requires a 4S 2200mAh-2600mAh 25C batteries for a realistic EDF fighter jet experience.

Stable Flight Technology

Reflex V3 stable flight technology aids pilots during takeoff and landing, stabilizes aircraft in normal and emergency situations, and helps reduce crash risks. Connect the Reflex V3 to your mobile phone via Bluetooth with the FMS app for customizable settings for FMS and other model aircraft.

Scale Detail Replication

Meticulously detailed with a non-functional scale detachable weapon sets (for air force gray livery only), an air refueling probe, a cockpit interior, and a pilot figure. These details provide increased realism.

Durable CNC Landing Gear

CNC-machined metal front landing gear that feature built-in shock absorption and realistic plastic parts for an authentic look and enhanced durability.

Reverse Thrust Capability

The ESC on the J-10 enables reverse taxiing and can also slow down The J-10 after landing. The ESC also includes protections against overheating, low voltage, and signal loss which enhances flight safety.

Bright Navigation Lights

Navigation lights have been added to the vertical tail, main wings, and belly air intake to enhance visibility during flight and replicate the design of real aircraft.

Iconic Paint Design

Choose from the iconic "August 1st" Aerobatic Team scheme or the classic Air Force gray scheme to suit your style.

Detachable Nose Cone Design

The J-10 adopts a detachable nose cone design that is easy to install and remove.

Videos

Videos

More Videos Please Go To Our Youtube Channel: FMS Model

Video
Video
Video

Parts

Parts
View All Parts

Manual & Support

FMS EDF Jet 64mm J-10 with Reflex V3 PNP

FMS EDF Jet 64mm J-10 with Reflex V3 PNP

NewSave $20.00Save $20.00

SKU: FMS149PGY-REFV3

Color: Air Force Gray
Regular price $199.99 USD
Sale price $199.99 USD Regular price $219.99 USD

Displayed points are based on product value.

Adventure Points Information

FMS VIP Adventure

The points displayed are based on the value of the product. Please refer to the account page to see the actual points after checkout.


Before checking out, please ensure you are logged into your account to avoid losing points.
Points are awarded and available for use once your order has been completely shipped.
To redeem points for coupons, please click on the top right corner of the page:
Sign in > Points & Coupons > Ways to Redeem.

 

Reward Page.png__PID:f74c6670-8212-46f0-8528-d8b3ed531ee6

Displayed points may not include bonus points for specific products. If a product has bonus points, the extra points will be shown in your account’s Transaction History. You can check your  bonus points in your account by signing in and navigating to:

Sign in >Points & Coupons > Transaction History.

Rewards start at just 300 points. Log into your account now and join the FMS VIP Adventure points journey!

 More payment options
Free Shipping Over $99

🚚Shipping Fee
• Free Shipping on orders over $99
• $15 Shipping Fee on orders under $99

⏰Shipping Time
RC Airplanes: 3-7 working days from the US warehouse
RC Cars: 3-7 working days from the US warehouse; 10-15 days from the Chinese warehouse
Parts & Accessories: 3-7 working days from the US warehouse; 10-15 days from the Chinese warehouse

👉🏻 Learn more about the Shipping Policy

30 Day Return

We offer a 30-day return policy for new and unused products purchased directly from www.fmshobby.com, which can be returned for a refund or credit. This policy covers items that are defective or DOA (Dead On Arrival), as well as those that have shipping damage, loss, or missing parts.

👉🏻 Learn more about the Return Policy

90 Day Warranty

Electronic accessories have a 90-day warranty from the date of delivery. At the same time, the customer is entitled to long-term official technician support.

👉🏻 Learn more about Warranty Policy

View full details

Customer Reviews

Based on 4 reviews
50%
(2)
50%
(2)
0%
(0)
0%
(0)
0%
(0)
T
Thomas Kanieski

Looks and flies great for the price

g
gregory S glasco
GREAT PLANE! REFLEX V3 HOWEVER.....WELL SOME ISSUES

The jet is flawless in both performance,scale and presence. The Reflex V3 however needs to be offered as a option and not standard. I found the Reflex V3 as setup even with using the app to be nowhere near customizable and far to restrictive.
if you purchase remove the Reflex V3 system and instal a receiver to handle all the functions including any GYRO functions, then you will love this jet. Leave the REFLEX V3 in and the jet is just....okay.

https://www.youtube.com/watch?v=fI4g-Wu27So

T
Thomas A Skic Jr
64mm J 10

Got the demo team scheme, kit was easy to assemble and fit of parts was very good. I run it on a 2200 set back slightly towards aft CG so I can get better at high alpha practice. All together it's a nice simple jet that flies well.

A
AARON MADDOX
Fun Plane

This is a fun plane. I never installed the landing gear, so can't speak to that. I hand launch and belly land it on grass. I did remove some low hanging bits to aid in belly landing. Easy to hand launch and belly land. It flies nice, but does have a little bit of wing rock, especially in windy conditions. I would like to see this offered in a 6s version.