Introducing the version 2 1100mm MXS 3D aerobatic plane from FMS Models. Designed for the intermediate to advanced 3D pilot & built specifically for 3D Flight, the version 2 MSX is now even better to please the most capable of 3D pilots.
Built from super strong EPO foam, the receiver ready MXS is glueless - ready to assemble requiring only 10 screws. Add your 4 channel receiver and 3s 2200mAh battery and you are ready to fly. Strong tube spars in the wing and tail create a super rigid structure that can withstand even the harshest 3D punishment. The updated powerful 3541 1230kv Outrunner, 40amp ESC, & 4 full Metal Gear Digital servos are pre-installed and ready to fly out of the box. The preinstalled precision ball links and rods expedite assembly time and provide precise control of nearly any aerobatic maneuver desired. Extra long, servo arms are designed in an over-center position from the control surface horns to provide massive amounts of control surface throw for low speed Harrier & hovering flight. Wing tip Side Force Generators further enhance the low speed performance by directing the airflow over the ailerons for more positive control. Tough but lightweight aluminum landing gear and large 2 1/2” wheels make grass takeoffs and landings a breeze. A large, magnetic hatch makes changing the battery quick and easy!
Painted in bright green and black, the new version 2 MXS is sure to get attention at the flying field... Easy to assemble, built tough & 3D ready.... Look no further than the New MXS from FMS Models!

Features:
1. Easy to assemble. Only needs glue for wing tip Vortex generators.
2. New hollow wing design for reduced weight and rigidity.
3. Wing tip Side Force Generators for superior Knife Edge and slow maneuvering. 
4. Super strong laminated control surface hinges.
5. Upgraded Powerful 35-41 1230kv Outrunner motor.
6. 40amp ESC.
7. Upgraded 4 digital full metal gear servos.
8. Wings and tail remove for transport, however the 1100mm size makes transportation easy. 
9. New ultra-visible green & black high contrast paint scheme. 
10. Upgraded extended Horizontal stabilizers and Vortex Generator for better performance.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

FMS is proud to announce the brand-new 2500mm ASW-17!

World champion pilot Daniel Aeberli joins model aircraft manufacturer FMS in creating the world's first scale performance foam glider- the ASW-17. True to the FMS spirit, no detail was overlooked in the design of the ASW-17. The FMS engineers made 4 expensive tooling adjustments just to micro-adjust the airfoil for perfect efficiency. 

The wing, vertical and horizontal stabilizers are designed with a snap-together structure. With a simple snap, the surfaces attach to the fuselage with pinpoint precision- no screws or glue necessary! Build the aircraft in as little as 3 minutes!

Like the 3000mm Fox, the ASW-17 has a pre-installed carbon fiber spar that ensures wing rigidity in high-G maneuvers. 

To achieve the same dihedral as the real aircraft, the ASW-17 was designed with a specialized CNC aluminum spar joiner- allowing the aircraft to maintain its wing geometry during demanding flight routines.

Performance-wise, a high-quality Hobbywing 40A ESC paired with a Predator 3541-750KV motor provides ample power with a 4S pack to perform most aerobatic maneuvers.

If efficiency, stability and aerobatic capabilities are what you seek in a glider, look no further than the FMS 2500mm ASW-17!

Features:

1.Predator 3541 motor and 40A ESC 

2.Snap together assembly, no glue necessary 

3.Two piece wing

4.Functional flaps 

5.Fold away high efficiency propeller 

6.Made of highly durable EPO

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Designed to replace the aging T-6 Texan, the T-28 Trojan was a piston engine military trainer aircraft used by both the US Air Force and the US Navy. The Navy continued to use this as the primary trainer right up to the early 1980’s.

FMS has chosen the most recognizable Navy color scheme for this outstanding flying model. Incorporating many scale features such as nose gear steering, dummy 9 cylinder radial engine, scale three blade prop and spinner make for an interesting model These features plus the power provided by the efficient brushless motor, will look great on the deck as well as screaming down the flying strip of your club.

With the Plug and Play version you will need your own Radio System of choice, Battery and Charger to be able to fly this model.

Key Features:

• Scale design Fuselage
• Scale Prop and Spinner
• Powerful FMS KV1700 Outrunner Motor
• Sturdy Metal landing gear

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

If you are looking for an easy to fly and affordable introduction to the exciting world of Radio Controlled flight then the 800 Easy Trainer is the aircraft for you.

Enjoy the thrill of R/C model flying with this Ready-To-Fly 800 Easy Trainer. In a matter of minutes you can be ready to take off as all electronics are pre-installed at the factory and adjusted for ease of use.

The 800 Easy Trainer is the ideal choice for beginners. Pleasing on the eye, its gentle and forgiving flight characteristics are perfect for pilots to enjoy flying, while coming to terms with a completely new experience. 

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.