VIP Adventurer
Hot RC Cars & Trucks
1 - 13 of 13 products
-
US onlyPre-Order Save $50.00
-
US only Save $40.00
FMS 1:24 FCX24 Chevrolet K5 BLAZER PRO RTR 18th Anniversary Brushless Edition In stock$159.99 USD $199.99 USD$159.99 USD -
Save $20.00
-
Save $30.00
-
Best seller Save $30.00
-
Best seller Save $30.00
-
Save $20.00
FMS 1:10 FCX10 LC80 Toyota Land Cruiser 80 RS
Description
| Length | 572mm |
| Width | 251mm |
| Height | 288mm |
| Wheelbase | 325mm |
| Tire F/R | Φ 46*120mm |
| Approach Angle | 51° |
| Departure Angle | 42° |
| Ground Clearance | 76mm |
| Motor | 550 32T Brushed Motor |
| Remote control distance | 150m |
| Remote control | 2.4GHz 6CH Remote Control System |
| Recommended Battery | 2S or 3S 5000mAh XT60 plug x1 (Product does not include batteries.) |
| Battery Compartment | 140 x 47 x 40mm |
FMS 1:24 FCX24 Chevrolet K5 BLAZER PRO RTR 18th Anniversary Brushless Edition
Description
K5 Blazer PRO
FMS 18th Anniversary Brushless Edition
Eighteen years of seasons passing, eighteen years of challenges and triumphs, eighteen years of growth and development—worthy of pride and honor.
The 18th Anniversary limited edition paint job from FMS is officially matched to the CHEVROLET K5 BLAZER, a fully licensed scale model from General Motors.
The model features the FCX24 chassis, and in addition to retaining the two-speed mechanical transmission from the original K5 BLAZER, FMS has equipped it with a 1212 outrunner brushless motor for the first time. This motor offers exceptionally precise linear control, providing an experience far superior to that of a brushed motor. You can feel the vehicle crawl at a snail's pace with smooth, consistent low-speed control. Additionally, the outrunner design brings excellent dynamic balance characteristics, further reducing noise and vibration levels without sacrificing performance.
Features:
- NEW! FMS 18th Anniversary limited edition painted simulation car body
- NEW! External rotor brushless motor, enabling ultra-low speed crawling
- NEW! Full ball bearings
-
NEW! Metal tie rods, metal straight axle teeth, metal gearbox teeth
- NEW! Steering servo with metal teeth
- Completed assembly
- Micro two-speed mechanical transmission
- Portal axle (metal gears)
- 4-link suspension
- High-strength mixed-fiber nylon unibody frame
- Quick release structure
- Front grille, front bumper, and luggage rack lights are available as optional extras
What's in the box:
- 1 x 1:24 Chevrolet K5 Blazer PRO RTR
- 1 x 2.4GHz Transmitter
- 1 x Brushless ESC (installed)
- 1 x Brushless Motor 3200KV (installed)
- 1 x 7.4V 380 mAh Battery
- 1 x USB Battery Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
Need to Complete:
4 x AAA Batteries for Transmitter
Specification:
- Length: 253mm
- Width: 129mm
- Height: 128mm
- Wheelbase: 139mm
- Tire F/R : Φ 54.8*19.5mm
- Minimum Ground Clearance: 38mm
- Approach Angle: 57°
- Departure Angle: 45°
- Motor: 1212 brushless motor 3200KV
- Battery: 2S Lipo 7.4V 380mAh
- Remote control distance: 30m
- Approx. operating duration time: 30mins
- Remote control: MG44 + R4P1 transmitter receiver set bs version
FMS 1:24 FCX24M Land Rover Camel Trophy Edition RTR
Description
| Model | Discovery | Range Rover | Defender 110 | Defender 90 |
| Length | 232mm | 227mm | 240mm | 214mm |
| Width | 105mm | 103mm | 107mm | 107mm |
| Height | 133mm | 120mm | 128mm | 128mm |
| Wheelbase | 134mm | 134mm | 135mm | 111mm |
| Tire F/R | Φ 48*17mm | Φ 48*17mm | Φ 50*20mm | Φ 50*20mm |
| Approach Angle | 52° | 64° | 55° | 55° |
| Departure Angle | 55° | 47° | 49° | 51° |
| Minimum Ground Clearance |
28mm | 28mm | 29mm | 24mm |
| Motor | 050 Motor Set | |||
| Battery | 7.4v 380mAh | |||
FMS 1:10 FCX10 Chevrolet K5 Blazer RS
Description
| Length | 548mm |
| Width | 249mm |
| Height | 285mm |
| Wheelbase | 324mm |
| Tire F/R | Φ 46*120mm |
| Approach Angle | 58° |
| Departure Angle | 48° |
| Ground Clearance | 89mm |
| Motor | 550 Brushed Motor |
| Remote control distance | 150m |
| Remote control | 2.4GHz 11CH Remote Control System |
| Recommended Battery | 2S Lipo 7.4V 2000mAh XT60 plug x1 (Product does not include batteries.) |
| Battery Compartment | 140 x 47 x 30mm |
FMS 1:18 FCX18 Chevrolet K10 RTR
Description
|
Product |
Model FS-MG41-BS |
|
RF |
2.4GHz ISM |
|
|
<20dBm (e.i.r.p.) (EU) |
|
2.4GHz Protocol |
2A-BS |
|
Resolution |
1024 |
|
Input Power |
6V/DC or 1.5AAA*4 |
|
Low Voltage Warning |
<4.2V |
|
Dimensions |
118*73*145mm |
FMS 1:24 FMT24 Chevrolet Colorado Monster Truck RTR
Description
| Length | 239mm |
| Width | 161mm |
| Height | 108mm |
| Wheelbase | 140mm |
| Tire F/R | D: 64.8mm, W: 33.4mm |
| Minimum Ground Clearance | 37mm |
| Approach Angle | 66° |
| Departure Angle | 53 ° |
| Motor | 370 brushed motor |
| Servo | 13g metal servo x 1, 9g servo x 1 |
| Battery | 2S Lipo 7.4V 900mAh 25C |
| Remote Control Distance | 80m |
| Approx. Operating Duration Time | 20mins |
| Remote Control | G3 V3+ R3B transmitter, receiver with ESC group control board |
FMS 1:18 FCX18 LC80 Toyota Land Cruiser 80 RTR
Description
|
Product |
Model FS-MG41-BS |
|
RF |
2.4GHz ISM |
|
|
<20dBm (e.i.r.p.) (EU) |
|
2.4GHz Protocol |
2A-BS |
|
Resolution |
1024 |
|
Input Power |
6V/DC or 1.5AAA*4 |
|
Low Voltage Warning |
<4.2V |
|
Dimensions |
118*73*145mm |
FMS 1:12 JIMNY RTR Green
Description
Movable Artwork in RC World - 1/12 SUZUKI Jimny
The officially licensed 1:12 scale Suzuki Jimny from FMS is an incredibly detailed and functional RC scaler. From the amazingly detailed interior, to the exterior body, chassis and suspension, this is an RC model that is based on its great role model in almost every area. The 1:12 Suzuki Jimny is ready to conquer the wilderness with you.
To create this officially licensed RC version of the 2021 Jimny, FMS engineers faithfully reproduced the full-size vehicle’s design & detail in versatile 1/12 scale. By including unexpectedly accurate features like a foldable rearview mirror, the FMS Suzuki Jimny marks a new high standard for RC realism. Its elaborate light system raises the bar even higher. Full-function LED headlights offer low & high-beam options, as well as working turn signals, fog lights, and brake lights.
Highlight
- From the amazingly detailed interior, outer body, or chassis and suspension, this is an RC model that replicates its full-size counterpart in virtually every area. The 1:12 Suzuki Jimny is ready to conquer the wilderness.
- Realistic Body Details
- Officially licensed product of the Suzuki Motor Corporation.
- Ready-to-Run 4WD.
- Painted body in the original coating, with stainless marks using the photo-etching technique.
- Electroplating Suzuki logo and light cups.
- Photo-etching honeycomb grille and authentic movable rear-view mirror.
- Fine wheel artwork mounted with natural rubber tires.
- Bumpers, wheel fenders and roof can be disassembled for personal modification.
- Outstanding car light system with up to 15 LEDs.
- Headlights: Full Beam / Dipped
- Turn signals: Activated when turning / Dual flash switch
- Fog lights: Front & rear fog lights can be activated remotely
- Brake lights: Activated when parking
- Reverse lights: Activated when reversing
Chic Interior
- Lift the hood for a featured lifelike scale engine with delicate detailing.
- Side doors open similar to the real Jimny.
- The steering wheel is driven by an independent servo, linked to the front wheel steering.
- Adjustable front seats, a perfect match for 1:12 figures.
- Open the backdoor, flatten the rear seats and enjoy some spacious storage!
- Trunk area features a hidden storage area.
- Super detailed interior and dashboard.
Robust Chassis
- Solid frame-full chassis structure.
- Metal frame rails.
- Front & rear 3-link rigid axle suspension with coil spring.
- The scale engine houses a 180 motor with a two-speed transmission.
- Metal gears.
- 25 stainless steel ball bearings.
- Metal U-joint driveshafts.
- Battery, servo, receiver, ESC, light control — all under the hood.
What's in the box :
- 1x FMS 1/12 Jimny RTR Crawler
- 1x 2.4GHz Transmitter
- 1x 2-in-1 ESC & Receiver (installed)
- 1x 180-Size Brushed Motor (installed)
- 1x 9g Digital Servo (installed)
- 1) 2S 7.4V 380mAh LiPo Battery
- 1x Durable Injection Molded Carrying Case
- 1x USB Charger
- 1x Hex Wrench Socket
- 1x Product Manual
Need to complete:
- AAA Batteries for Radio
Specification:
Radio Control: 152 x 75 x 167mm, 150g (Battery not Included)
Model Vehicle: 291 x 135 x 158mm, 985g(Battery not Included)
Tire: D:60mm , W:15mm
Wheel Base: 187mm
Ground Clearance: 16mm
Approach Angle: 61°
Departure Angle: 60°
Driving Speed: up to 8km/h
Remote Distance: 30m
Play Time: 20 minute
Product Manual
FMS 1:24 FCX24 Chevrolet K5 Blazer RTR
Description
| Length | 253mm |
| Width | 129mm |
| Height | 128mm |
| Wheelbase | 139mm |
| Tire F/R | Φ 54.8*19.5mm |
| Approach Angle | 57° |
| Departure Angle | 45° |
| Ground Clearance | 38mm |
| Motor | 130 Brushed Motor |
| Remote control distance | 30m |
| Approx. operating duration time | 20mins |
FMS 1:10 Toyota Land Cruiser FJ40 RS
Description
| Length | 571mm |
| Width | 268mm |
| Height | 326mm |
| Wheelbase | 339mm |
| Tire F/R | Φ 115mm |
| Approach Angle | 65° |
| Departure Angle | 40° |
| Ground Clearance | 82mm |
| Motor | 35T 550 Brushed motor |
| Remote control distance | 80m |
| Remote control | 2.4GHz Transmitter (Fibre Style) & Receiver Set |
FMS 1:12 Land Rover Series II RTR
Description
Adventurer's Staple, Off-Road Legends - 1:12 Land Rover
The Land Rover Series 2 is an iconic off-road vehicle that well represents the adventurous spirit of the Land Rover brand. It combines outstanding durability with outstanding versatility, making it the ideal companion for outdoor enthusiasts and adventure seekers.
The new Land Rover Series II launched by FMS inherits the essence of real cars in terms of highly realistic appearance, comfortable fully simulated interior, durable chassis and powerful power system.
Whether traversing rugged mountains, traversing muddy trails, or crossing rivers, FMS-Land Rover Series 2 can bring an exciting and reliable handling experience, embodying the spirit of pioneering adventure, allowing players to create unforgettable memories.
Features:
- The whole vehicle adopts ball bearings, and the transmission is more efficient.
- Two-speed transmission, which can be switched freely according to different needs.
- Four-wheel drive system, excellent off-road performance.
- The structural design of leaf springs and metal beams improves the load-carrying capacity and durability of the vehicle.
- Fully simulated interior with exquisite details.
- The vehicle lighting system includes direction linkage to enrich user experience.
- The hood, doors on both sides and tailgate can be opened, and the windshield can be folded down.
- The roof can be replaced with different styles, providing more personalized options.
What's in the box:
- 1 x 1:12 Land Rover Series II RTR
- 1 x 2.4G Transmitter + 2 in1 ESC & Receiver (installed)
- 1 x 180 Brushed Motor (installed)
- 3 x 3Y 9g Digital Servo (installed)
- 1 x 2S Lipo 7.4V 380mAh Battery
- 1 x USB Battery Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
- 1 x Bind Connector
Need to Complete:
4 x AAA Batteries for Transmitter
Specification:
- Length: 270mm
- Width: 135mm
- Height: 149mm
- Wheelbase: 169mm
- Tire F/R : Φ 54.8*19.5mm
- Minimum Ground Clearance: 31mm
- Approach Angle: 57°
- Departure Angle: 42 °
- Motor: 180 Brushed motor
- Battery: 2S Lipo 7.4V 380mAh x1
- Remote control distance: 30m
- Approx. operating duration time: 20mins
- Remote control: MG41-BS transmitter, R4A1 receiver with ESC group control board
FMS 1:24 FCX24 Lemur RTR
Description
| Length | 209mm |
| Width | 128mm |
| Height | 120mm |
| Wheelbase | 136mm |
| Tire | D: 66mm, W:22mm |
| Minimum Ground Clearance | 41mm |
| Reduction ratio | (High Gears ) 24.75/(Low Gears ) 99 |
| Motor | 130 Brushed motor |
| Battery | 2S Lipo 7.4V 380mAh x1 |
| Remote control distance | 80m |
| Approx. operating duration time | 20mins |
| Remote control | G3+ R3A transmitter, receiver with ESC group control board |
| Key functions | Two Speed Transmission/Portal Axle |
