$20 OFF RC Airplanes
1 - 4 of 4 products
FMS EDF Jet 70mm Avanti V3 PNP
Description
Introduction Features
Notes to buyers:
|
RTF (Ready to fly): A RTF plane includes the plane with the radio, receiver, battery, charger, motor, servos, retracts (if it has) and ESC already in place.
PNP (Plug and Play) - A PNP foam plane includes the plane with the motor, servos, retracts (if it has) and ESC already in place. Battery and charger are not included. Radio and receiver are not included.
KIT: A KIT plane is an airframe only. It does not include any motor, ESC, or servos (though usually includes servoless retracts on planes with retracts).
FMS 2300mm FOX V2 Glider PNP
Description
Overview
The MDM 1 Fox is a composite unlimited aerobatic glider. At its first public unveiling it managed to place first in non other than the World Championships! Since then it has become a regular aircraft on podiums throughout the world.
Seating two in relative comfort it also performs very well in cross-country even though it only has a glide ratio of 28:1. Sleek and efficient with fantastic unlimited aerobatic flight envelope are attributes that set this glider apart and make it an excellent model for Famous to replicate.
FMS has created this wonderfully exciting aerobatic glider in impact absorbing and resilient EPO foam. The mold quality is sublime adding to the efficiency and great looks. Combined with a high powered brushless motor and LiPo battery, gives the budding modeler a new level of high performance excitement.
This glider features glass/carbon composite and aluminum tube strengthened wings that are easily removable for transport and a very compact fuselage adding further to the enjoyment of this model.
Positive and negative loops, stall turns, point rolls and inverted flight are all easily performed with this model and it will also perform excellently simply hunting for thermals or slope flying, making it suitable for a wide range of pilots.
Features
Ball link connectors are used replacing the traditional clevis
Flaps up 25 degree and down 60 degree for more aerobatic
Huge 2300mm wingspan provides stable flights and long fly times. A perfect platform for aerial photography
EPO foam construction
Carbon composite wing reinforcement tube
Wings easily remove for easy transportation
Brushless motor, ESC and servos installed (PNP version)
Specification
Wing span | 2300mm / 91.4in |
Overall length | 1290mm / 50.8in |
Flying weight | ~ 1150g |
Wing load | 30.7g/dm² |
Wing area | 37.5dm² |
Servo | 9g Servo x 6 |
Recommended battery | Li-Po 11.1V 1300mAh 25C |
Battery Connector | XT60 |
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
FMS 1400mm F3A Olympus PNP
Description
Overview
A year in the making! Introducing the new FMS F3A OLYMPUS, the latest creation in the FMS Aerobatic line of models. With its elegant and graceful lines, superb flying qualities, the F3A is a must for the aerobatic pilot to add to his hangar. Working with RC Hobbyist’s worldwide, FMS has developed this aircraft to meet all the precision flying requirements needed to compete in F3a aerobatic competition.
Key features:
* Easy to complete, bolt-on final assembly
* Exceptionally strong 55 times EPO foam
* High-output, 4250 KV550 PAEP Brand High performance motor installed
* Digital high-speed, 17g digital metal gear servos installed
* Fully-hinged control surfaces with control links installed
* Modern cockpit details and pilot bust installed
* Efficient interior ducting provides generous component cooling
* Small up wing to make the performance better
* Large scale, stable flight platform handles windy condition.
* Large, scale control surfaces for aerobatic flight
* Spacious battery compartment gives pilots the option of flying light weight 5S batteries for full 3D or * larger 6S batteries for more sport and longer run times
* Strong landing gear to hand hard
* Pinned rudder hinges
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included
Specification | |
Wingspan | 1400 mm/ 55.1 in |
Overall Length | 1548 mm/ 61 in |
Flying Weight | Around 2400g /5.3lb |
Motor Size | Brushless 4258-KV550 |
ESC | 60A |
Servo | 17g digital metal gear Servo x 4 |
Radio | 4 Channel |
CG (center of gravity) | 180-190mm (From Leading Edge) |
Prop Size | 15*8 |
Recommended Battery | Li-Po 22.2V 3300mAh 35C |
Battery Connector | EC5 |
Aileron | Yes |
Elevator | Yes |
Rudder | Yes |
Flaps | No |
Retracts | No |
Approx. Flying Duration | 6 minutes |
Minimum Age Recommendation | 14+ |
Experience Level | Intermediate |
Assembly Time | 45 minutes |
Wing Load | 60.8 g/dm²(20 oz/sq.ft) |
Wing Area | 39.5 dm²/612 sq.in |
FMS 1200mm CJ6 PNP
Description
FMS 1200mm Nanchang CJ-6 V2 “PLAAF Demonstration team”
FMS is proud to release the popular Nanchang CJ-6 V2 with a brand-new PLAAF demonstration team trim scheme.
Known for its predictable flight characteristics, aerobatic capabilities and rugged dependability- the Nanchang CJ-6 has served as the basic trainer aircraft for the PLAAF since 1958.
Like its predecessor, the FMS 1200mm Nanchang CJ-6 V2 is built with a carbon-reinforced EPO foam structure- this lightweight yet robust construction allows for excellent durability, light wing-loading and prolonged flight times.
A redesigned electric landing gear system can withstand heavy impacts- expected with any trainer aircraft!
Visually, bright LED navigation lights and the realistic PLAAF demonstration team trim scheme add to what was already a very accurate model of the Nanchang CJ-6.
If you’re looking for an aircraft that will help you learn the ropes with ease and teach you basic aerobatics, don’t miss the FMS 1200mm Nanchang CJ-6 V2!
Features
1. 3541- 840KV motor, 40A ESC
2. Ultra-bright LED navigation lights
3. Realistic airframe design
4. Ultra lightweight carbon-reinforced EPO structure
5. Functional split-flaps
6. PLAAF demonstration team trim scheme
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
Specification | |
Wingspan | 1200mm/47.2in |
Overall Length | 1000mm/39.4in |
Flying Weight | Around 1560g |
Motor Size | Brushless 3541-KV840 |
ESC | 40A |
Servo | 9g Servo x 6 |
Radio | 6 Channel |
CG (center of gravity) | 60-70mm (From Leading Edge) |
Prop Size | 11*7, 2 blade |
Recommended Battery | Li-Po 14.8V 2200mAh 25C |
Battery Connector | XT60 |
Aileron | Yes |
Elevator | Yes |
Rudder | Yes |
Flaps | Yes |
Retracts | Yes |
Approx. Flying Duration | 6 minutes |
Minimum Age Recommendation | 14+ |
Experience Level | Intermediate |
Assembly Time | 10 minutes |
Wing Load | 57.8 g/dm² (0.13oz/in²) |
Wing Area | 25.1dm²(389.1 sq.in) |