VIP Adventurer
FMS FCX Series
1 - 10 of 10 products
-
US onlyPre-Order Save $50.00
-
US only Save $40.00
FMS 1:24 FCX24 Chevrolet K5 BLAZER PRO RTR 18th Anniversary Brushless Edition In stock$159.99 USD $199.99 USD$159.99 USD -
Save $20.00
-
Best seller Save $30.00
-
Best seller Save $30.00
-
Save $30.00
FMS 1:10 FCX10 LC80 Toyota Land Cruiser 80 RS
Description
| Length | 572mm |
| Width | 251mm |
| Height | 288mm |
| Wheelbase | 325mm |
| Tire F/R | Φ 46*120mm |
| Approach Angle | 51° |
| Departure Angle | 42° |
| Ground Clearance | 76mm |
| Motor | 550 32T Brushed Motor |
| Remote control distance | 150m |
| Remote control | 2.4GHz 6CH Remote Control System |
| Recommended Battery | 2S or 3S 5000mAh XT60 plug x1 (Product does not include batteries.) |
| Battery Compartment | 140 x 47 x 40mm |
FMS 1:24 FCX24 Chevrolet K5 BLAZER PRO RTR 18th Anniversary Brushless Edition
Description
K5 Blazer PRO
FMS 18th Anniversary Brushless Edition
Eighteen years of seasons passing, eighteen years of challenges and triumphs, eighteen years of growth and development—worthy of pride and honor.
The 18th Anniversary limited edition paint job from FMS is officially matched to the CHEVROLET K5 BLAZER, a fully licensed scale model from General Motors.
The model features the FCX24 chassis, and in addition to retaining the two-speed mechanical transmission from the original K5 BLAZER, FMS has equipped it with a 1212 outrunner brushless motor for the first time. This motor offers exceptionally precise linear control, providing an experience far superior to that of a brushed motor. You can feel the vehicle crawl at a snail's pace with smooth, consistent low-speed control. Additionally, the outrunner design brings excellent dynamic balance characteristics, further reducing noise and vibration levels without sacrificing performance.
Features:
- NEW! FMS 18th Anniversary limited edition painted simulation car body
- NEW! External rotor brushless motor, enabling ultra-low speed crawling
- NEW! Full ball bearings
-
NEW! Metal tie rods, metal straight axle teeth, metal gearbox teeth
- NEW! Steering servo with metal teeth
- Completed assembly
- Micro two-speed mechanical transmission
- Portal axle (metal gears)
- 4-link suspension
- High-strength mixed-fiber nylon unibody frame
- Quick release structure
- Front grille, front bumper, and luggage rack lights are available as optional extras
What's in the box:
- 1 x 1:24 Chevrolet K5 Blazer PRO RTR
- 1 x 2.4GHz Transmitter
- 1 x Brushless ESC (installed)
- 1 x Brushless Motor 3200KV (installed)
- 1 x 7.4V 380 mAh Battery
- 1 x USB Battery Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
Need to Complete:
4 x AAA Batteries for Transmitter
Specification:
- Length: 253mm
- Width: 129mm
- Height: 128mm
- Wheelbase: 139mm
- Tire F/R : Φ 54.8*19.5mm
- Minimum Ground Clearance: 38mm
- Approach Angle: 57°
- Departure Angle: 45°
- Motor: 1212 brushless motor 3200KV
- Battery: 2S Lipo 7.4V 380mAh
- Remote control distance: 30m
- Approx. operating duration time: 30mins
- Remote control: MG44 + R4P1 transmitter receiver set bs version
FMS 1:24 FCX24M Land Rover Camel Trophy Edition RTR
Description
| Model | Discovery | Range Rover | Defender 110 | Defender 90 |
| Length | 232mm | 227mm | 240mm | 214mm |
| Width | 105mm | 103mm | 107mm | 107mm |
| Height | 133mm | 120mm | 128mm | 128mm |
| Wheelbase | 134mm | 134mm | 135mm | 111mm |
| Tire F/R | Φ 48*17mm | Φ 48*17mm | Φ 50*20mm | Φ 50*20mm |
| Approach Angle | 52° | 64° | 55° | 55° |
| Departure Angle | 55° | 47° | 49° | 51° |
| Minimum Ground Clearance |
28mm | 28mm | 29mm | 24mm |
| Motor | 050 Motor Set | |||
| Battery | 7.4v 380mAh | |||
FMS 1:10 FCX10 Chevrolet K5 Blazer RS
Description
| Length | 548mm |
| Width | 249mm |
| Height | 285mm |
| Wheelbase | 324mm |
| Tire F/R | Φ 46*120mm |
| Approach Angle | 58° |
| Departure Angle | 48° |
| Ground Clearance | 89mm |
| Motor | 550 Brushed Motor |
| Remote control distance | 150m |
| Remote control | 2.4GHz 11CH Remote Control System |
| Recommended Battery | 2S Lipo 7.4V 2000mAh XT60 plug x1 (Product does not include batteries.) |
| Battery Compartment | 140 x 47 x 30mm |
FMS 1:18 FCX18 Chevrolet K10 RTR
Description
|
Product |
Model FS-MG41-BS |
|
RF |
2.4GHz ISM |
|
|
<20dBm (e.i.r.p.) (EU) |
|
2.4GHz Protocol |
2A-BS |
|
Resolution |
1024 |
|
Input Power |
6V/DC or 1.5AAA*4 |
|
Low Voltage Warning |
<4.2V |
|
Dimensions |
118*73*145mm |
FMS 1:18 FCX18 LC80 Toyota Land Cruiser 80 RTR
Description
|
Product |
Model FS-MG41-BS |
|
RF |
2.4GHz ISM |
|
|
<20dBm (e.i.r.p.) (EU) |
|
2.4GHz Protocol |
2A-BS |
|
Resolution |
1024 |
|
Input Power |
6V/DC or 1.5AAA*4 |
|
Low Voltage Warning |
<4.2V |
|
Dimensions |
118*73*145mm |
FMS 1:24 FCX24 Chevrolet K5 Blazer RTR
Description
| Length | 253mm |
| Width | 129mm |
| Height | 128mm |
| Wheelbase | 139mm |
| Tire F/R | Φ 54.8*19.5mm |
| Approach Angle | 57° |
| Departure Angle | 45° |
| Ground Clearance | 38mm |
| Motor | 130 Brushed Motor |
| Remote control distance | 30m |
| Approx. operating duration time | 20mins |
FMS 1:24 FCX24 Mercedes-Benz Unimog 421 RTR
Description
| Length | 249mm |
| Width | 153mm |
| Height | 160mm |
| Wheelbase | 142mm |
| Tire F/R | Φ 20mm |
| Approach Angle | 49° |
| Departure Angle | 69° |
| Ground Clearance | 40mm |
| Motor | 130 Brushed Motor |
| Remote control distance | 30m |
| Approx. operating duration time | 20mins |
FMS 1:24 FCX24 Lemur RTR
Description
| Length | 209mm |
| Width | 128mm |
| Height | 120mm |
| Wheelbase | 136mm |
| Tire | D: 66mm, W:22mm |
| Minimum Ground Clearance | 41mm |
| Reduction ratio | (High Gears ) 24.75/(Low Gears ) 99 |
| Motor | 130 Brushed motor |
| Battery | 2S Lipo 7.4V 380mAh x1 |
| Remote control distance | 80m |
| Approx. operating duration time | 20mins |
| Remote control | G3+ R3A transmitter, receiver with ESC group control board |
| Key functions | Two Speed Transmission/Portal Axle |
FMS 1:24 FCX24 Power Wagon RTR
Description
The World's First 1/24 Climbing Rock Crawler with Two-speed Transmission - Power Wagon FCX24
FCX24 meticulously designed by FMS team will redefine the small scale climbing rc car. As the first product of the FCX24 series, the car body is the POWER WAGON in 1949, which appeared in the form of a mud off-road truck. It is positioned as a high-performance crawler chassis. The carframe is made of high-strength nylon. Compared with the trapezoidal beam spliced by metal side beams and plastic trusses, the overall weight is lighter and the strength is higher. The mid-mounted power assembly has a low center of gravity and integrates the 2-speed transmission, transfer case and 130 motor. The power is transmitted to the front and rear axles through the universal joint drive shaft. The axles are equipped with wheel side reducers, commonly known as "portal axle", which can increase the ground clearance of the differential tooth pack and improve the passability.
Features:
- Ready To Run Model
- Two Speed Transmission
- Port Alaxle, High Ground Clearance For Climb
- Metal Gears Steering Servo
- Four Link Suspension
- High Strength Integrated Nylon Frame
- Power wagon polystyrene body
- Rapid separation car body
- Nylon roll cage
- Painted body
- Remote control lighting system
- Original personalized stickers
What's in Box:
- 1 x 1:24 Power Wagon RTR
- 1 x G3 V1 Transmitter
- 1 x R3A V1 Receiver (installed)
- 1 x 130 Brushed Motor (installed)
- 1 x 7.4V 380mAh Battery
- 1 x USB Battery Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
Need to Complete:
- 4 x AAA Batteries for Transmitter
