Adventurer's Staple, Off-Road Legends - 1:12 Land Rover

The Land Rover Series 2 is an iconic off-road vehicle that well represents the adventurous spirit of the Land Rover brand. It combines outstanding durability with outstanding versatility, making it the ideal companion for outdoor enthusiasts and adventure seekers.

The new Land Rover Series II launched by FMS inherits the essence of real cars in terms of highly realistic appearance, comfortable fully simulated interior, durable chassis and powerful power system.

Whether traversing rugged mountains, traversing muddy trails, or crossing rivers, FMS-Land Rover Series 2 can bring an exciting and reliable handling experience, embodying the spirit of pioneering adventure, allowing players to create unforgettable memories.

What's in the box:

• 1 x 1:12 Land Rover Series II RTR
• 1 x 2.4G Transmitter + 2 in1 ESC & Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 3 x 3Y 9g Digital Servo (installed)
• 1 x 2S Lipo 7.4V 380mAh Battery
• 1 x USB Battery Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual
• 1 x Bind Connector
  
  

Need to Complete:

4 x AAA Batteries for Transmitter

Specification:

• Length: 270mm
  
• Width: 135mm
• Height: 149mm
• Wheelbase: 169mm
• Tire F/R : Φ 54.8*19.5mm
• Minimum Ground Clearance: 31mm
• Approach Angle: 57°
• Departure Angle: 42 °
• Motor: 180 Brushed motor
• Battery: 2S Lipo 7.4V 380mAh x1
• Remote control distance: 30m
• Approx. operating duration time: 20mins
• Remote control: MG41-BS transmitter, R4A1 receiver with ESC group control board

1:12 TOYOTA FJ45 Pickup Truck

To create this officially licensed RC version of the TOYOTA FJ45, FMS super-finely restores the real car, and the degree of restoration is no less than that of the static model.

The hood hinge is the same living hinge as the real car, and it looks slim and beautiful on the 1/12 model car. The motor, steering servo and 2-in-1 integrated ESC / receiver are all hidden under the hood, and the battery is also here, for easy installation. The doors on both sides can be opened, the front windshield can be folded forward, if the roof is removed at the same time, it can be transformed into a convertible shape. If the screws on the slender hinges of the doors are removed, the doors can be removed, showing a more simple and wild performance. At this time, the cockpit is more transparent, the steering linkage action of steering wheel can be seen at a glance, and it is also more convenient to carry 1/12 flexible figures.

The two-speed gearbox provides powerful torque. Metal gears carry power, with bearings all over the whole vehicle, allow it moving forward slowly even if it is fully loaded with gravel. The TOYOTA logo on the rear of the car restores the stereoscopic stamping effect of the steel plate of the real car. The tailgate can be opened to load extra-long "cargo". There are two sets of taillights on the left and right of the tailgate, each set includes a turn signal, a brake light, and a reversing light. With the input of the light control button on the transmitter, the linkage effect is consistent with the driving action. The front headlights have linkage effect of far and near beam and turn signal.

What's in the box:

• 1 x 1:12 TOYOTA FJ45 RTR
• 1 x 2.4G Transmitter
• 1 x 2-in-1 Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 1 x 9g Plastic Digital Servo (installed)
• 1 x 2S 7.4V 380mAh Battery with PCM
• 1 x USB Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual

Need to Complete:

4 x AAA Batteries for Transmitter

Specification:

• Length: 345mm
• Width: 127mm
• Height: 124mm
• Wheel base: 270mm
• Tire: D:60mm , W:15mm
• Ground clearance: 29mm
• Approach angle: 58°
• Departure angle: 29.9°
• The Highest Driving speed: 8km/h
• Remote control distance: 30m
• Play time: 20 minute

1:10 Mashigan - BORN ADVENTURER

For adventurers, the road ahead is always rough and full of thorns, but whether there is a road or no road, this 1:10 Mashigan's 1.9 inch climbing tires can give you confidence, and meanwhile, the four-link suspension system gives you a guarantee of strong power, the metal trapezoidal beams provide you with a solid supportive structure. Even with a hard plastic car shell with a complete interior, Mashigan can easily overcome extreme road conditions. The real first-generation model uses leaf spring suspension, and adventurers will not ignore the history, the chassis can be installed with leaf spring suspension (sold separately) to restore the style of the first generation model. Pursuing the needs of climbing performance and restoration seems to be impossible, but through the compatible design of the chassis and the replacement of a few accessories, it can show a completely different shape. Two postures, and double the fun.

The exquisite interior and four-door full-opening design double the level of detail of this hard-shell RC model, which can be viewed statically or operated indoors. With climbing-level sturdy chassis and suspension system, FMS 1:10 Mashigan make it cool to go wild!

What's in the box:

1 x 1:10 Mashigan RS
1 x 2.4GHz Radio
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 550 Brushed Motor (installed)
1 x 9g Plastic Digital Servo (installed)
1 x 15kg Metal Digital Servo(installed)
1 x Product Manual

Need to Complete:

• 4 x AA Batteries for Radio
• Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)

Specification:

• Radio Control: 160 x 193 x 97mm, 221g (Battery not Included)
• Model Vehicle: 546 x 274 x 282mm, 4kg (Battery not Included)
• Tire: D:115mm, W:30mm
• Wheel Base: 339mm
• Ground Clearance: 82mm
• Approach Angle: 68°
• Departure Angle: 47°
• Driving Speed: up to 15km/h
• Remote Distance: 80m
• Play Time: 20 minute
  
  

Introducing the version 2 1100mm MXS 3D aerobatic plane from FMS Models. Designed for the intermediate to advanced 3D pilot & built specifically for 3D Flight, the version 2 MSX is now even better to please the most capable of 3D pilots. 

Built from super strong EPO foam, the receiver ready MXS is glueless - ready to assemble requiring only 10 screws. Add your 4 channel receiver and 3s 2200mAh battery and you are ready to fly. Strong tube spars in the wing and tail create a super rigid structure that can withstand even the harshest 3D punishment. The updated powerful 3541 1230kv Outrunner, 40amp ESC, & 4 full Metal Gear Digital servos are pre-installed and ready to fly out of the box. The preinstalled precision ball links and rods expedite assembly time and provide precise control of nearly any aerobatic maneuver desired. Extra long, servo arms are designed in an over-center position from the control surface horns to provide massive amounts of control surface throw for low speed Harrier & hovering flight. Wing tip Side Force Generators further enhance the low speed performance by directing the airflow over the ailerons for more positive control. Tough but lightweight aluminum landing gear and large 2 1/2” wheels make grass takeoffs and landings a breeze. A large, magnetic hatch makes changing the battery quick and easy!

Painted in bright green and black, the new version 2 MXS is sure to get attention at the flying field... Easy to assemble, built tough & 3D ready.... Look no further than the New MXS from FMS Models!

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Overview
The Vought F4U Corsair was a carrier capable fighter aircraft, equipped with the largest available engine at the time, the Pratt & Whitney R2800, the engine had 18 cylinders and delivered over 2000hp . The first model of this aircraft was delivered as a prototype to the US Navy in 1940.

The FMS model of the F4U Corsair has many scale features including a beautiful 3 blade propeller and scale hub. The aircraft features a brushless motor, 20Amp ESC and 4 ready installed servos. Assembly, following the simple photo step by step assembly guide takes minutes. The EPO foam construction provides a light weight yet resilient airframe that will make your adrenaline fueled dog fights genuine fun. So what are you waiting for order today.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Overview
Maybe you're a new modeler looking for an easy-to-fly plane...or a more experienced pilot who wants the additional maneuverability of an aileron-equipped model.

Either way, the 1280 Easy Trainer is a great choice and suitable for a wide range of pilots. Featuring a top mount motor system with a pusher prop, designed to help the beginner by saving prop breakage, the design also lends itself to the beginner or even advance First Person View (FPV) pilot. No prop distortion. The small compact design makes it easy to carry to your flying site and be in the air quickly. 

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

After two-years of numerous flying tests and continuous improvements, the eagerly anticipated 1500mm P-47, is coming! The 1500mm P-47 features many new and innovative features over the original 1400mm P-47.

The new P-47 shows great detail by including 99% scaled control surface, landing gear cover, cockpit interiors, plastic cowling, gun turrets, retracted landing gear, and panel lines.

The original oil paint has been replaced by the latest environmental water-based paint. The water-based paint is environmental-friendly, and is designed to protect the foam parts under any condition. Additional structural changes include the lighter and larger EPO 52 foam, this change alleviates the airplane weight for an impressive flight performance, without weakening the airplane strength. The new CNC processed shock-absorbed front landing gear effectively helps to withstand those less than perfect landings. The control horn now adopts the new ball link design which helps provide a more accurate flight. The new 4258 KV460 motor coupled with our Predator high quality 80A ESC completes a stronger more powerful system. All servos are now metal gear digital servos. Furthermore, this 1500mm P-47 adopts the latest 2016 FMS electric retract. The 2016 FMS electric retract gets a commendable upgrade on both appearance and performance.

The P-47 has a lot of new customer-friendly features based on easy of assembly and transportation by eliminating the wiring problems. All channels on each wing are brought together in a fuselage to wing port. To complete installing the main wing set simply inserting the wing port into the fuselage half, then fixing the wing with four screws. 

The new P-47 is far more than a RC model, it is a great new addition to your RC Warbirds collection. If you like RC Warbirds, the 1500mm P-47 is a typical one that you cannot miss.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Overview

If you're looking for your first 1:18 RC monster truck, look no further than the EAZYRC 1:18 Chevrolet Colorado, licensed by General Motors LLC. 17g digital servo, 45A brushless ESC, 2S Li-Po battery, and a 4-pole high-torque brushless motor provide sufficient power for the full-time four-wheel drive system. The top speed reaches 45 km/h.

The chassis uses a honeycomb structure with metal reinforcements to increase the overall strength, and the durability is superior to that of similar products. The all-metal gears and metal differentials plus durable steel drive shafts, provide reliable heavy-duty transmission and can withstand extreme high-speed impacts. The whole vehicle adopts a modular chassis design so that the power system, electronic equipment, and differential components are easy to disassemble and the daily vehicle maintenance is simple. The all-metal oil-filled shock absorbers are proven to withstand the impact of high-speed jumps. The tires with asymmetric tread patterns provide EAZYRC 1:18 Chevrolet Colorado with excellent grip, making it easy to run smoothly on almost any road.

What's in Box

1 x 1:18 Chevrolet Colorado RTR
1 x 2.4G Transmitter
1 x R4A Receiver(installed)
1 x 45A Brushless ESC(installed)
1 x 370 Brushless Motor (installed)
1 x 17g Digital Servo (installed)
1X 7.4V 1050mAh LIPO Battery
1 x USB Charger
1 x Hex Wrench Socket
1 x Product Manual

Need to Complete

4 x AA Batteries for Transmitter

Specification