Overview

The world is always full of mavericks, and Maule was one of them. Can you believe it? While the whole world geared up to fly higher and faster, Maule was doing the opposite - to fly slower and lower- and he did it.
The FMS 1500mm model Maule replicates the low-speed handling and short take-off and landing (STOL) features of the real Maule to the greatest extent possible. Aided by lightweight and durable EPO foam and functional flaps, FMS Maule is capable of taking off within three meters.
In line with the product concept of "perfect appearance, excellent performance", FMS Maule includes an abundance of scale detail. From the crystal-clear cabin windows and interior decoration, to molded panel lines, antennas, rivets, vortex generators and functional LED lights, FMS Maule pushes the limits of restoration degree that can be achieved in an aircraft of the same size and type.
Maule can be equipped with two sets of landing gear - a tire set and a float set, for conquering any terrain year-round. The pre-installed 3S/4S compatible brushless power system delivers plenty of performance for flying from smooth or rough surfaces using the oversized wheels, or from water using the included float set.
FMS Maule - enjoy unparalleled flying pleasure.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Overview

If you're looking for your first 1:18 RC monster truck, look no further than the EAZYRC 1:18 Chevrolet Colorado, licensed by General Motors LLC. 17g digital servo, 45A brushless ESC, 2S Li-Po battery, and a 4-pole high-torque brushless motor provide sufficient power for the full-time four-wheel drive system. The top speed reaches 45 km/h.

The chassis uses a honeycomb structure with metal reinforcements to increase the overall strength, and the durability is superior to that of similar products. The all-metal gears and metal differentials plus durable steel drive shafts, provide reliable heavy-duty transmission and can withstand extreme high-speed impacts. The whole vehicle adopts a modular chassis design so that the power system, electronic equipment, and differential components are easy to disassemble and the daily vehicle maintenance is simple. The all-metal oil-filled shock absorbers are proven to withstand the impact of high-speed jumps. The tires with asymmetric tread patterns provide EAZYRC 1:18 Chevrolet Colorado with excellent grip, making it easy to run smoothly on almost any road.

What's in Box

1 x 1:18 Chevrolet Colorado RTR
1 x 2.4G Transmitter
1 x R4A Receiver(installed)
1 x 45A Brushless ESC(installed)
1 x 370 Brushless Motor (installed)
1 x 17g Digital Servo (installed)
1X 7.4V 1050mAh LIPO Battery
1 x USB Charger
1 x Hex Wrench Socket
1 x Product Manual

Need to Complete

4 x AA Batteries for Transmitter

Specification

1:10 Mashigan - BORN ADVENTURER

For adventurers, the road ahead is always rough and full of thorns, but whether there is a road or no road, this 1:10 Mashigan's 1.9 inch climbing tires can give you confidence, and meanwhile, the four-link suspension system gives you a guarantee of strong power, the metal trapezoidal beams provide you with a solid supportive structure. Even with a hard plastic car shell with a complete interior, Mashigan can easily overcome extreme road conditions. The real first-generation model uses leaf spring suspension, and adventurers will not ignore the history, the chassis can be installed with leaf spring suspension (sold separately) to restore the style of the first generation model. Pursuing the needs of climbing performance and restoration seems to be impossible, but through the compatible design of the chassis and the replacement of a few accessories, it can show a completely different shape. Two postures, and double the fun.

The exquisite interior and four-door full-opening design double the level of detail of this hard-shell RC model, which can be viewed statically or operated indoors. With climbing-level sturdy chassis and suspension system, FMS 1:10 Mashigan make it cool to go wild!

What's in the box:

1 x 1:10 Mashigan RS
1 x 2.4GHz Radio
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 550 Brushed Motor (installed)
1 x 9g Plastic Digital Servo (installed)
1 x 15kg Metal Digital Servo(installed)
1 x Product Manual

Need to Complete:

• 4 x AA Batteries for Radio
• Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)

Specification:

• Radio Control: 160 x 193 x 97mm, 221g (Battery not Included)
• Model Vehicle: 546 x 274 x 282mm, 4kg (Battery not Included)
• Tire: D:115mm, W:30mm
• Wheel Base: 339mm
• Ground Clearance: 82mm
• Approach Angle: 68°
• Departure Angle: 47°
• Driving Speed: up to 15km/h
• Remote Distance: 80m
• Play Time: 20 minute
  
  

ROCHOBBY 1:10 Atlas 4x4 Off-Road Truck RS

This 1:10 Atlas 4x4 is designed in the form of an off-road truck racer. The car body is moulded with PC plastic, which is light in weight and has a low center of gravity; the nylon roll cage at the back can protect the car shell during rollovers. The rigid metal frame and four-link suspension system ensure strong climbing ability. The chassis has proven reliability. In both dynamic and static aspects, the real vehicle has been painstakingly restored.

1:10 Mashigan - BORN ADVENTURER

For adventurers, the road ahead is always rough and full of thorns, but whether there is a road or no road, this 1:10 Mashigan's 1.9 inch climbing tires can give you confidence, and meanwhile, the four-link suspension system gives you a guarantee of strong power, the metal trapezoidal beams provide you with a solid supportive structure. Even with a hard plastic car shell with a complete interior, Mashigan can easily overcome extreme road conditions. The real first-generation model uses leaf spring suspension, and adventurers will not ignore the history, the chassis can be installed with leaf spring suspension (sold separately) to restore the style of the first generation model. Pursuing the needs of climbing performance and restoration seems to be impossible, but through the compatible design of the chassis and the replacement of a few accessories, it can show a completely different shape. Two postures, and double the fun.

The exquisite interior and four-door full-opening design double the level of detail of this hard-shell RC model, which can be viewed statically or operated indoors. With climbing-level sturdy chassis and suspension system, FMS 1:10 Mashigan make it cool to go wild!

What's in the box:

1 x 1:10 Mashigan RS
1 x 2.4GHz Radio
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 550 Brushed Motor (installed)
1 x 9g Plastic Digital Servo (installed)
1 x 15kg Metal Digital Servo(installed)
1 x Product Manual

Need to Complete:

• 4 x AA Batteries for Radio
• Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)

Specification:

• Radio Control: 160 x 193 x 97mm, 221g (Battery not Included)
• Model Vehicle: 546 x 274 x 282mm, 4kg (Battery not Included)
• Tire: D:115mm, W:30mm
• Wheel Base: 339mm
• Ground Clearance: 82mm
• Approach Angle: 68°
• Departure Angle: 47°
• Driving Speed: up to 15km/h
• Remote Distance: 80m
• Play Time: 20 minute
  
  

70mm EDF SU-27 PNP

The Su-27 fighter is a single-seat twin-engine all-weather heavy fighter developed by the Soviet Sukhoi Design Bureau. It has ultra-low-altitude flight capabilities, excellent maneuverability and stealth performance, and can still independently complete combat missions, including deep execution of combat missions, when it lacks ground control information.
The R&D team of FMS started from the two aspects of "dynamic" and "static", taking 14 months to restore this classic and unique SU-27 fighter.
“Dynamic” means power and mobility. Dual 70mm inrunner 12 bladed EDFs and high-quality 80A ESCs provide ample thrust for high speed, excellent vertical performance and resonating turbine engine sound. In addition, the pre-installed metal gear servos and ball link style control horns make for more responsive and precise operation.
“Static” means degree of reduction. FMS captures the essence of this fighter. Functional restoration, such as large size airbrake, LED navigation lights & landing lights, full-motion tail, landing gear door with sequencing effect, retractable landing gear system that can resist hard landings, static restoration such as cockpit details, panel lines, detachable ordnance, pilot, and highly recognizable trim scheme, all these details combine to make the FMS Su-27 stand out on the tarmac and in flight.

70mm EDF J-11 PNP

The J-11 fighter is a domestic version of the Su-27 that the People's Republic of China authorized from Russia. It is a third-generation fighter. The Shenyang Aircraft Company established a production line, and Russia supplied the main parts and systems to form production and assembly capabilities. Later, China carried out independent research and development on its basis, and derived newer models such as J-11B and J-11BS.
Superlative dark gray paint, smooth aerodynamic contour, outlines a unique sense of modern technology- FMS dual 70mm EDF J-11.
In terms of performance, Dual 70mm inrunner 12 bladed EDFs and high-quality 80A ESCs provide ample thrust for high speed, excellent vertical performance and resonating turbine engine sound. In addition, the pre-installed metal gear servos and ball link style control horns make for more responsive and precise operation.
In terms of appearance, FMS captures the essence of this fighter. Functional restoration, such as large size airbrake, LED navigation lights & landing lights, full-motion tail, landing gear door with sequencing effect, retractable landing gear system that can resist hard landings, static restoration such as cockpit details, panel lines, detachable ordnance, pilot, and highly recognizable trim scheme, all these details combine to make the FMS J-11 stand out on the tarmac and in flight.

Features:

• Dual 70mm inrunner 12 bladed EDFs and high-quality 80A ESCs provide ample thrust.
• High degree of reduction of dynamic and static details.
• High-quality wear-resistant rubber tires
• Electronic retracts with locked-rotor mode and over current protection
• Large-size bearings are used in the wheel hub for take-offs and landings on rough roads.
• Pre-installed, newly designed ball link style control horns for more throw

 Specification:

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not include

The J-11 fighter is a domestic version of the Su-27 that the People's Republic of China authorized from Russia. It is a third-generation fighter. The Shenyang Aircraft Company established a production line, and Russia supplied the main parts and systems to form production and assembly capabilities. Later, China carried out independent research and development on its basis, and derived newer models such as J-11B and J-11BS.

Superlative dark gray paint, smooth aerodynamic contour, outlines a unique sense of modern technology- FMS dual 70mm EDF J-11.

In terms of performance, Dual 70mm inrunner 12 bladed EDFs and high-quality 80A ESCs provide ample thrust for high speed, excellent vertical performance and resonating turbine engine sound. In addition, the pre-installed metal gear servos and ball link style control horns make for more responsive and precise operation.

In terms of appearance, FMS captures the essence of this fighter. Functional restoration, such as large size airbrake, LED navigation lights & landing lights, full-motion tail, landing gear door with sequencing effect, retractable landing gear system that can resist hard landings, static restoration such as cockpit details, panel lines, detachable ordnance, pilot, and highly recognizable trim scheme, all these details combine to make the FMS J-11 stand out on the tarmac and in flight.

Get yourself a J-11 and bring new excitement to the flying field!

 Specification:

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

The Su-27 fighter is a single-seat twin-engine all-weather heavy fighter developed by the Soviet Sukhoi Design Bureau. It has ultra-low-altitude flight capabilities, excellent maneuverability and stealth performance, and can still independently complete combat missions, including deep execution of combat missions, when it lacks ground control information.

The R&D team of FMS started from the two aspects of "dynamic" and "static", taking 14 months to restore this classic and unique SU-27 fighter.

“Dynamic” means power and mobility. Dual 70mm inrunner 12 bladed EDFs and high-quality 80A ESCs provide ample thrust for high speed, excellent vertical performance and resonating turbine engine sound. In addition, the pre-installed metal gear servos and ball link style control horns make for more responsive and precise operation.

“Static” means degree of reduction. FMS captures the essence of this fighter. Functional restoration, such as large size airbrake, LED navigation lights & landing lights, full-motion tail, landing gear door with sequencing effect, retractable landing gear system that can resist hard landings, static restoration such as cockpit details, panel lines, detachable ordnance, pilot, and highly recognizable trim scheme, all these details combine to make the FMS Su-27 stand out on the tarmac and in flight.

Get yourself a Su-27 and bring new excitement to the flying field!

 Specification:

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. It was developed from the Piper PA-11. In close to 40 years of production, over 9,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing.
The FMS 1700mm PA-18 was launched in 2019, and its stable, easy-to-fly and easy-to-operate features have brought full surprises to both new and old pilots. While this trainer has been widely praised, FMS has been constantly asked whether it is possible to reduce the size of the aircraft, including the aircraft itself and the packaging, while maintaining its stability and operating controllability as much as possible, so that it can be picked up like a boarding suitcase.
With the 1300mm PA-18, FMS has answered the above question. The 1300mm PA-18 also adopts a two-section main wing and horizontal stability structure, but at the same time, the fuselage is also two-section, which greatly facilitates players' transportation and carrying. It can be hidden in the corner of a car trunk, ready to be used at any time.
Thanks to its functional flaps, high-lift airfoil, rugged landing gear and oversized pneumatic rubber tires- the 1300mm PA-18 Super Cub has impressive short take-off and landing (STOL) performance, allowing it to operate from just about any terrain.
In addition, the assembly steps of the 1300mm PA-18 are still simple and convenient, and the assembly and disassembly of the entire aircraft can be completed with just a few screws.
For pilots wanting to get the genuine bush-plane experience, the PA-18 Super Cub can be equipped with floats.
The latest 1300mm PA-18 could be a great start to enjoying versatile, fun and exceptionally relaxing flight.

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

FMS is proud to announce the brand-new 2500mm ASW-17!

World champion pilot Daniel Aeberli joins model aircraft manufacturer FMS in creating the world's first scale performance foam glider- the ASW-17. True to the FMS spirit, no detail was overlooked in the design of the ASW-17. The FMS engineers made 4 expensive tooling adjustments just to micro-adjust the airfoil for perfect efficiency. 

The wing, vertical and horizontal stabilizers are designed with a snap-together structure. With a simple snap, the surfaces attach to the fuselage with pinpoint precision- no screws or glue necessary! Build the aircraft in as little as 3 minutes!

Like the 3000mm Fox, the ASW-17 has a pre-installed carbon fiber spar that ensures wing rigidity in high-G maneuvers. 

To achieve the same dihedral as the real aircraft, the ASW-17 was designed with a specialized CNC aluminum spar joiner- allowing the aircraft to maintain its wing geometry during demanding flight routines.

Performance-wise, a high-quality Hobbywing 40A ESC paired with a Predator 3541-750KV motor provides ample power with a 4S pack to perform most aerobatic maneuvers.

If efficiency, stability and aerobatic capabilities are what you seek in a glider, look no further than the FMS 2500mm ASW-17!

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Overview

The MDM 1 Fox is a composite unlimited aerobatic glider. At its first public unveiling it managed to place first in non other than the World Championships! Since then it has become a regular aircraft on podiums throughout the world.

Seating two in relative comfort it also performs very well in cross-country even though it only has a glide ratio of 28:1. Sleek and efficient with fantastic unlimited aerobatic flight envelope are attributes that set this glider apart and make it an excellent model for Famous to replicate.

FMS has created this wonderfully exciting aerobatic glider in impact absorbing and resilient EPO foam. The mold quality is sublime adding to the efficiency and great looks. Combined with a high powered brushless motor and LiPo battery, gives the budding modeler a new level of high performance excitement.

This glider features glass/carbon composite and aluminum tube strengthened wings that are easily removable for transport and a very compact fuselage adding further to the enjoyment of this model.

Positive and negative loops, stall turns, point rolls and inverted flight are all easily performed with this model and it will also perform excellently simply hunting for thermals or slope flying, making it suitable for a wide range of pilots.

Specification

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.