VIP Adventurer
RC Cars & RC Airplane - KOL
1 - 24 of 94 products
-
-
-
-
-
-
-
-
-
-
-
-
FMS 1100mm P-51 Mustang V2 with Reflex V2, PNP (Only Shipped to Canada) In stock$289.99 USD$289.99 USD
FMS 1:18 FCX18 Hummer EV Pickup Truck RTR
Description
| Length | 328mm |
| Width | 138mm |
| Height | 133mm |
| Wheelbase | 199mm |
| Tire F/R | Φ 66*22mm |
| Minimum Ground Clearance | 40mm |
| Approach Angle | 51° |
| Departure Angle | 41° |
| Motor | 180 Brushed motor |
| Battery | 2S LiPo 7.4V 900mAh x1 |
| Remote control distance | 30m |
| Approx. operating duration time | 45mins |
| Remote control | MG41-BS transmitter，R4A3 receiver with ESC group control board |
FMS EDF Jet 64mm F-16 Fighting Falcon PNP
Description
| Model | F-16 Thunderbird | F-16 Battlefield Gray |
| Wingspan | 712mm /28 in | 740mm /29.1 in |
| Overall Length | 1090mm /42.9 in | 1090mm /42.9 in |
| Flying Weight | Around 1070g | Around 1350g |
| Wing Load | 68 g/dm² ( 0.14oz/in²) | 85.4 g/dm² ( 0.17oz/in²) |
| Wing Area | 15.8 dm² ( 244.7 sq.in) | |
| Motor Size | 2840 KV3150 | |
| ESC | 40A | |
| EDF | 64mm Ducted Fan 12-blade | |
| Servo | 9gX6pcs | |
| Recommended battery | 14.8V2200mAh-2600mAh 25c with XT60 connector | |
| Radio | 6CH Channel | |
| CG (center of gravity) | 75-85mm | |
| Battery compartment size | 160x55x42mm | |
| Aileron | Yes | |
| Rudder | Yes | |
| Flaps | No | |
| Retracts | No | |
| Approx. Flying Duration | 3 minutes | |
| Minimum Age Recommendation | 14+ | |
| Assembly Time | 10minutes | |
FMS 1:24 FCX24M Land Rover Camel Trophy Edition RTR
Description
| Model | Discovery | Range Rover | Defender 110 | Defender 90 |
| Length | 232mm | 227mm | 240mm | 214mm |
| Width | 105mm | 103mm | 107mm | 107mm |
| Height | 133mm | 120mm | 128mm | 128mm |
| Wheelbase | 134mm | 134mm | 135mm | 111mm |
| Tire F/R | Φ 48*17mm | Φ 48*17mm | Φ 50*20mm | Φ 50*20mm |
| Approach Angle | 52° | 64° | 55° | 55° |
| Departure Angle | 55° | 47° | 49° | 51° |
| Minimum Ground Clearance |
28mm | 28mm | 29mm | 24mm |
| Motor | 050 Motor Set | |||
| Battery | 7.4v 380mAh | |||
FMS 1500mm Cessna 182 PNP
FMS 1:10 FCX10 Chevrolet K5 Blazer RS
Description
| Length | 548mm |
| Width | 249mm |
| Height | 285mm |
| Wheelbase | 324mm |
| Tire F/R | Φ 46*120mm |
| Approach Angle | 58° |
| Departure Angle | 48° |
| Ground Clearance | 89mm |
| Motor | 550 Brushed Motor |
| Remote control distance | 150m |
| Remote control | 2.4GHz 11CH Remote Control System |
| Recommended Battery | 2S Lipo 7.4V 2000mAh XT60 plug x1 (Product does not include batteries.) |
| Battery Compartment | 140 x 47 x 30mm |
FMS EDF Jet 80mm Integral PNP
Description
| Wingspan | 1060mm /41.7in |
| Overall Length | 1190mm /46.8in |
| Flying Weight | Around 2500g |
| Motor Size | 3665-KV2000 |
| ESCA | 100A |
| Servo | 13gX8pcs |
| Radio | 6CH Channel |
| CG (center of gravity) | 155-165mm |
| EDF | 80mm Ducted Fan 12-blade |
| Recommended Battery | 22.2V 4000mAh-5000mAh 45c |
| Battery Compartment Size | 160*55*45mm |
| Aileron | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | Yes |
| Approx. Flying Duration | 3 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Medium High |
| Assembly Time | 10 minutes |
| Wing Load | 116 g/dm² ( 0.23oz/in²) |
| Wing Area | 21.5dm² ( 333sq.in) |
FMS 1:18 FCX18 Chevrolet K10 RTR
FMS 1:10 Toyota Land Cruiser FJ40 RS (Only Shipped to Canada)
Description
| Length | 571mm |
| Width | 268mm |
| Height | 326mm |
| Wheelbase | 339mm |
| Tire F/R | Φ 115mm |
| Approach Angle | 65° |
| Departure Angle | 40° |
| Ground Clearance | 82mm |
| Motor | 35T 550 Brushed motor |
| Remote control distance | 80m |
| Remote control | 2.4GHz Transmitter (Fibre Style) & Receiver Set |
FMS EDF Jet 80mm F-86 Sabre PNP
Description
| Wingspan | 1220mm /48 in |
| Overall Length | 1165mm /46 in |
| Flying Weight | Around 3050g |
| Motor Size | 3665-KV2000 |
| ESC | 100A |
| Servo | 13gX8, 9gX3 |
| Radio | 6 Channel |
| CG (center of gravity) | 180-190mm |
| Prop Size | 80mm Ducted Fan 12-blade |
| Recommended Battery | 22.2V 4000mAh-5500mAh 45c |
| Battery Connector | EC5 |
| Battery Compartment Size | 200*68*45mm |
| Aileron | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | Yes |
| Approx. Flying Duration | 3 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Upper-Intermediate |
| Assembly Time | 10 minutes |
| Wing Load | 95.3 g/dm² (0.18oz/in²) |
| Wing Area | 32dm² (495.8 sq.in) |
FMS 1:24 FCX24 Mercedes-Benz Unimog 421 RTR
Description
| Length | 249mm |
| Width | 153mm |
| Height | 160mm |
| Wheelbase | 142mm |
| Tire F/R | Φ 20mm |
| Approach Angle | 49° |
| Departure Angle | 69° |
| Ground Clearance | 40mm |
| Motor | 130 Brushed Motor |
| Remote control distance | 30m |
| Approx. operating duration time | 20mins |
FMS 1:24 FMT24 Chevrolet Colorado Monster Truck RTR
Description
| Length | 239mm |
| Width | 161mm |
| Height | 108mm |
| Wheelbase | 140mm |
| Tire F/R | D: 64.8mm, W: 33.4mm |
| Minimum Ground Clearance | 37mm |
| Approach Angle | 66° |
| Departure Angle | 53 ° |
| Motor | 370 brushed motor |
| Servo | 13g metal servo x 1, 9g servo x 1 |
| Battery | 2S Lipo 7.4V 900mAh 25C |
| Remote Control Distance | 80m |
| Approx. Operating Duration Time | 20mins |
| Remote Control | G3 V3+ R3B transmitter, receiver with ESC group control board |
FMS 1:64 ALU35 RTR With FPV
Description
| ALU35 RC Car | |
| Length | 54mm |
| Width | 36mm |
| Channels | 8 Channels |
| Remote control distance | 30m |
| FPV Goggles - LCD Screen | |
| Screen Size | 4.3 Inch |
| Display Ratio | 16:9 |
| Resolution | 800 x 480 |
| Video delay | Video time-delay less than 0.01ms |
| FPV Goggles - Interface | |
| Antenna | 2 X RP-SMA male |
| AV Jack | AV signal input display |
| USB | To charge the battery |
| Card slot | TF-Card, Support up to 32G (C10 recommend) |
| FPV Goggles - DVR | |
| Frame rate | 30 Frames |
| 30 Frames | VGA / D1 / HD (Selectable) |
| Image format | MJPEG |
| REC Sound | ON / OFF (Selectable) |
| Video format | AVI |
| REC time | OFF/3/5/10min (Selectable) |
| FPV Goggles - Body | |
| Dimension | 155x144x113mm |
| Weight | 300g (Without antenna) |
| FPV Goggles - Power Supply | |
| Power adapter | DC5V/2A (USB interface) |
|
Battery: 3.7V/2000mAh (Built-in battery maximum charge current of 500mA) |
|
FMS 1:24 FCX24 Lemur RTR
Description
| Length | 209mm |
| Width | 128mm |
| Height | 120mm |
| Wheelbase | 136mm |
| Tire | D: 66mm, W:22mm |
| Minimum Ground Clearance | 41mm |
| Reduction ratio | (High Gears ) 24.75/(Low Gears ) 99 |
| Motor | 130 Brushed motor |
| Battery | 2S Lipo 7.4V 380mAh x1 |
| Remote control distance | 80m |
| Approx. operating duration time | 20mins |
| Remote control | G3+ R3A transmitter, receiver with ESC group control board |
| Key functions | Two Speed Transmission/Portal Axle |
FMS 1:18 FCX18 LC80 Toyota Land Cruiser 80 RTR
Description
FMS EDF Jet 64mm Futura PNP
Description
| Wingspan | 900mm /35.4 in |
| Overall Length | 995mm /39.2 in |
| Flying Weight | Around 1150g |
| Motor Size | 2840 KV3150 |
| ESC | 40A |
| Servo | 9gX8pcs |
| Radio | 6CH Channel |
| CG (center of gravity) | 85-95mm |
| Prop Size | 64mm Ducted Fan 11-blade |
| Recommended Battery | 14.8V2200mAh-2600mAh 25c |
| Battery Connector | XT60 |
| Aileron | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | No |
| Approx. Flying Duration | 3 minutes |
| Minimum Age Recommendation | 14+ |
| Experience Level | Upper-Intermediate |
| Assembly Time | 10 minutes |
| Wing Load | 71.8 g/dm² ( 0.14oz/in²) |
| Wing Area | 16dm² ( 247.9 sq.in) |
FMS 1:12 Land Rover Series II RTR
Description
Adventurer's Staple, Off-Road Legends - 1:12 Land Rover
The Land Rover Series 2 is an iconic off-road vehicle that well represents the adventurous spirit of the Land Rover brand. It combines outstanding durability with outstanding versatility, making it the ideal companion for outdoor enthusiasts and adventure seekers.
The new Land Rover Series II launched by FMS inherits the essence of real cars in terms of highly realistic appearance, comfortable fully simulated interior, durable chassis and powerful power system.
Whether traversing rugged mountains, traversing muddy trails, or crossing rivers, FMS-Land Rover Series 2 can bring an exciting and reliable handling experience, embodying the spirit of pioneering adventure, allowing players to create unforgettable memories.
Features:
- The whole vehicle adopts ball bearings, and the transmission is more efficient.
- Two-speed transmission, which can be switched freely according to different needs.
- Four-wheel drive system, excellent off-road performance.
- The structural design of leaf springs and metal beams improves the load-carrying capacity and durability of the vehicle.
- Fully simulated interior with exquisite details.
- The vehicle lighting system includes direction linkage to enrich user experience.
- The hood, doors on both sides and tailgate can be opened, and the windshield can be folded down.
- The roof can be replaced with different styles, providing more personalized options.
What's in the box:
- 1 x 1:12 Land Rover Series II RTR
- 1 x 2.4G Transmitter + 2 in1 ESC & Receiver (installed)
- 1 x 180 Brushed Motor (installed)
- 3 x 3Y 9g Digital Servo (installed)
- 1 x 2S Lipo 7.4V 380mAh Battery
- 1 x USB Battery Charger
- 1 x Hex Wrench Socket
- 1 x Product Manual
- 1 x Bind Connector
Need to Complete:
4 x AAA Batteries for Transmitter
Specification:
- Length: 270mm
- Width: 135mm
- Height: 149mm
- Wheelbase: 169mm
- Tire F/R : Φ 54.8*19.5mm
- Minimum Ground Clearance: 31mm
- Approach Angle: 57°
- Departure Angle: 42 °
- Motor: 180 Brushed motor
- Battery: 2S Lipo 7.4V 380mAh x1
- Remote control distance: 30m
- Approx. operating duration time: 20mins
- Remote control: MG41-BS transmitter, R4A1 receiver with ESC group control board
ROCHOBBY 1:10 Atlas 4x4 Off-Road Truck RS (Only Shipped to Canada)
Description
ROCHOBBY 1:10 Atlas 4x4 Off-Road Truck RS
This 1:10 Atlas 4x4 is designed in the form of an off-road truck racer. The car body is moulded with PC plastic, which is light in weight and has a low center of gravity; the nylon roll cage at the back can protect the car shell during rollovers. The rigid metal frame and four-link suspension system ensure strong climbing ability. The chassis has proven reliability. In both dynamic and static aspects, the real vehicle has been painstakingly restored.
Features:
- READY SET
- BALL BEARINGS FULL SET
- METAL GEAR FULL SET
- NYLON ROLL CAGE
- METAL FRAME
- FOUR-LINK SUSPENSION
- RAPID SEPARATION CAR BODY
- PAINTED BODY
- ORIGINAL PERSONALIZED STICKERS
- 120mm AT TIRE
- 35T 550 MOTOR
- 2.4GHz RADIO SYSTEM
What's in Box:
- 1 x 1:10 1:10 Atlas 4x4 RS
- 1 x 2.4GHz Transmitter
- 1 x 2-in-1 Receiver / 40A ESC (installed)
- 1 x 550 Brushed Motor (installed)
- 1 x 9g Plastic Digital Servo (installed)
- 1 x 15kg Metal Digital Servo(installed)
- 1 x Product Manual
Need to Complete:
- 4 x AA Batteries for Transmitter
- Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)
Specification:
- Length: 537mm
- Width: 241mm
- Height: 247mm
- Wheelbase: 340mm
- Tire F/R: Φ 120mm
- Approach Angle: 63°
- Departure Angle:53°
- Ground Clearance: 79mm
- Motor: 35T 550 Brushed motor
- Driving speed: up to 15km/h
- Remote control distance: 80m
- Approx. operating duration time: 20mins
- Remote control: 2.4GHz Transmitter (Fibre Style) & Receiver Set
FMS 1:10 Toyota Land Cruiser FJ40 RS
Description
| Length | 571mm |
| Width | 268mm |
| Height | 326mm |
| Wheelbase | 339mm |
| Tire F/R | Φ 115mm |
| Approach Angle | 65° |
| Departure Angle | 40° |
| Ground Clearance | 82mm |
| Motor | 35T 550 Brushed motor |
| Remote control distance | 80m |
| Remote control | 2.4GHz Transmitter (Fibre Style) & Receiver Set |
ROCHOBBY 1:10 Atlas 4x4 Off-Road Truck RS
Description
ROCHOBBY 1:10 Atlas 4x4 Off-Road Truck RS
This 1:10 Atlas 4x4 is designed in the form of an off-road truck racer. The car body is moulded with PC plastic, which is light in weight and has a low center of gravity; the nylon roll cage at the back can protect the car shell during rollovers. The rigid metal frame and four-link suspension system ensure strong climbing ability. The chassis has proven reliability. In both dynamic and static aspects, the real vehicle has been painstakingly restored.
Features:
- READY SET
- BALL BEARINGS FULL SET
- METAL GEAR FULL SET
- NYLON ROLL CAGE
- METAL FRAME
- FOUR-LINK SUSPENSION
- RAPID SEPARATION CAR BODY
- PAINTED BODY
- ORIGINAL PERSONALIZED STICKERS
- 120mm AT TIRE
- 35T 550 MOTOR
- 2.4GHz RADIO SYSTEM
What's in Box:
- 1 x 1:10 1:10 Atlas 4x4 RS
- 1 x 2.4GHz Transmitter
- 1 x 2-in-1 Receiver / 40A ESC (installed)
- 1 x 550 Brushed Motor (installed)
- 1 x 9g Plastic Digital Servo (installed)
- 1 x 15kg Metal Digital Servo(installed)
- 1 x Product Manual
Need to Complete:
- 4 x AA Batteries for Transmitter
- Battery for Kit (Recommended 2S LIPO 5000mAh XT60 plug)
Specification:
- Length: 537mm
- Width: 241mm
- Height: 247mm
- Wheelbase: 340mm
- Tire F/R: Φ 120mm
- Approach Angle: 63°
- Departure Angle:53°
- Ground Clearance: 79mm
- Motor: 35T 550 Brushed motor
- Driving speed: up to 15km/h
- Remote control distance: 80m
- Approx. operating duration time: 20mins
- Remote control: 2.4GHz Transmitter (Fibre Style) & Receiver Set
FMS 1100mm P-51 Mustang V2 with Reflex V2, PNP (Only Shipped to Canada)
Description
By popular demand, FMS is proud to announce the re-release of the 1100mm P-51 racer; wearing the optional trim scheme of Dago Red, Miss America, Voodoo and Blue Thunder II.
Scale detailing and upgraded electronics are impeccably integrated: the FMS 1100mm P-51 racer features a realistic four-bladed propeller, forward tilting landing gear, functional flaps, scale cockpit, engine exhausts, air intake, wing fences and antenna.
Built with robust EPO material and painted with environmentally friendly water-based paint, the P-51 racer looks gorgeous at any speed and altitude. Reach speeds in excess of 90 mph thanks to the highly efficient four-bladed prop, 900kV motor, 80A ESC and 14.8V 2,600 mAh battery.
Feel the heart pounding exhilaration of an unlimited class air racer with the FMS 1100mm P-51 racer today!
Features:
1. Oversized power system: 3948- 900kV motor, 80A brushless ESC, 9g digital metal servos
2. Highly realistic: Forward tilting landing gear, scale four-bladed propeller, functional flaps, realistic cockpit, engine exhausts, air intake, wing fences, antenna etc.
3. Oversized battery compartment: able to accept up to a 4,000 mAh pack for extended flight times.
4. Metal trunnion landing gear
5. Ball-linked pushrods for precision control
6. Dago Red trim scheme
7. Built with robust EPO material
8. Painted with environmentally friendly water-based paint
| Specification | |
| Wingspan | 42.1in |
| Overall Length | 38.1in |
| Flying Weight | Around 1390 g |
| Motor Size | Brushless3948-900KV |
| ESC | 80A |
| Servo |
9g x 6pcs
|
| Radio | 6Channel |
| CG (center of gravity) | 70-80mm (From Leading Edge) |
| Prop Size | 10.5*8 4 |
| Recommended Battery | 14.8V 2600MAH 35C |
| Battery Connector | EC5 |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Flaps | Yes |
| Retracts | Yes |
| Approx. Flying Duration | 8min |
| Minimum Age Recommendation | 14+ |
| Experience Level | Expert |
| Assembly Time | 15mins |
| Wing Load | 67.1g/d㎡( 0.15oz/in²) |
| Wing Area | 20.7d㎡(320.8sq.in) |
Notes to buyers:
RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
